'2 3 meters'

The Amaron Quanta 12V 130Ah batteries are lead-acid batteries typically used for solar power storage, backup power systems, and other applications that require reliable energy storage. Here's a detailed overview of this battery: Key Features of Amaron Quanta 12V 130Ah Battery: Battery Type: Lead-Acid: This is a type of flooded or sealed (VRLA) lead-acid battery, suitable for deep cycle applications. 12V System: Designed for systems that operate on a 12V DC supply, often used in small-scale solar energy systems, inverters, and backup power setups. Capacity: 130Ah (Ampere-hour): This indicates the battery’s storage capacity. It means the battery can deliver 130 amps for 1 hour or 1 amp for 130 hours at a nominal voltage of 12V. For example, if the system uses 1A of current, the battery will last for around 130 hours before needing a recharge. Applications: Solar Power Systems: To store energy generated by solar panels. UPS (Uninterruptible Power Supply): Provides backup during power outages. Off-Grid Systems: Stores energy for homes or businesses in remote areas. Electric Vehicles and RVs: Sometimes used for backup and auxiliary power. Charging and Discharging: Charging: The battery can be charged through solar panels, inverters, or a regular charger. It is recommended to avoid deep discharges to extend the battery life. Discharging: It should not be discharged fully for longevity. Typically, a depth of discharge (DoD) of 50% to 70% is ideal for long-term use. Battery Life: Cycle Life: Typically, a lead-acid battery like the Amaron Quanta 12V 130Ah can last around 3-5 years, depending on usage and maintenance. Proper charging and maintenance (like keeping the terminals clean and ensuring adequate ventilation) can improve the lifespan of the battery. Advantages: Reliable and Cost-Effective: Lead-acid batteries are typically less expensive than other types of batteries, like lithium-ion. Widely Available: Amaron is a well-known brand, and their batteries are widely available and easy to replace. Maintenance: Flooded Lead-Acid: If it’s a flooded type, you may need to periodically check the water levels and top up with distilled water. VRLA (Valve-Regulated Lead-Acid): If it's a sealed type, it requires less maintenance as it’s sealed and does not need water refills. Specifications: Voltage: 12V Capacity: 130Ah Weight: Around 40-45 kg (approx.), depending on the specific model and construction type. Dimensions: Varies by model, but typically it is about 410mm (L) x 175mm (W) x 240mm (H). Conclusion: The Amaron Quanta 12V 130Ah battery is a good choice for off-grid solar systems, backup power applications, or any system requiring long-lasting energy storage. It offers a solid balance of performance, cost-effectiveness, and reliability. Proper care and maintenance will ensure it provides reliable service for years to come.

The Liebert SX series from Vertiv offers UPS systems ranging from 60 kVA to 200 kVA, utilizing full IGBT double conversion technology. This design enhances efficiency, reduces installation and operational costs, and provides reliable power backup solutions for critical applications. Key Features of Liebert SX 60kVA to 200kVA Modular Design: The Liebert SX series features a modular architecture that allows for easy scalability and maintenance. Front Access Design: This design minimizes repair time and optimizes installation and serviceability, making it user-friendly. Environmental Standards: The Liebert SX series is designed to meet high environmental standards, promoting energy efficiency and sustainability. ID Card for Each UPS: Each unit comes with an ID card that includes all working parameters, which helps in reducing downtime during maintenance. Applications Power Backup: Ideal for critical applications requiring uninterrupted power supply. Data Centers: Suitable for use in data centers where reliability and efficiency are paramount. Industrial Use: Can be utilized in various industrial settings to ensure consistent power availability. Contact Information for Further Inquiries Company: Universal Power System Location: Plot No.-70, Udyog Vihar-VI, Sector-37 Gurugram, Haryana, India -122001 Mobile - 8744823336 Email: info@universalpower.co.in

The Vertiv 3 kVA UPS options primarily include the Liebert GXT MT+ and Liebert GXT5 models, both designed for reliable power protection and conditioning. Liebert GXT MT+ (1/2/3 kVA): Topology: Online Double Conversion, ensuring a continuous and clean power supply. Efficiency: High efficiency ratings, typically around 94% in online mode. Input Voltage Range: Wide input voltage range to accommodate various power conditions. Battery Options: Configurable with internal and external battery options for extended runtime. Display: LCD display for real-time monitoring of UPS status and parameters. Liebert GXT5 (1-3 kVA): Topology: Also features Online Double Conversion for superior power quality. Efficiency: Offers up to 95% efficiency in online mode, contributing to lower operational costs. Form Factor: Compact design suitable for rack or tower configurations. Battery Management: Advanced battery management system for optimal battery performance and lifespan. Communication: Equipped with multiple communication options, including USB, RS232, and SNMP for remote monitoring. Key Features: Protection: Provides protection against power disturbances such as surges, spikes, and outages. Scalability: Can be integrated into larger systems for increased capacity and redundancy. Warranty: Typically comes with a standard warranty, often around 2 years, depending on the model and region. Support and Services: Technical Support: Vertiv offers technical support for installation, maintenance, and troubleshooting. Contact Information: Customers can reach out to Vertiv\'s support team for assistance or inquiries. This overview highlights the essential features and specifications of the Vertiv 3 kVA UPS models, suitable for various applications requiring reliable power protection.

The Vertiv Liebert GXT5-20KMVRT11UXLN is a 20kVA (20000VA) rack/tower UPS from the Liebert GXT5 series. The GXT5 series provides high-performance, reliable power protection for critical equipment in IT environments such as data centers, server rooms, and telecommunications. The Liebert GXT5-20KMVRT11UXLN model is specifically designed to deliver high availability, efficient energy management, and flexible configurations (tower or rackmount). Here\'s a detailed breakdown of the Vertiv Liebert GXT5-20KMVRT11UXLN UPS: Key Features of the Vertiv Liebert GXT5-20KMVRT11UXLN: 1. Power Rating and Capacity: Power Rating: 20kVA / 20000VA Output Power: 16000W (16kW) at 208V (depending on load conditions) This provides robust protection for high-density IT loads, such as servers, network switches, telecom systems, and critical infrastructure. 2. Voltage Configuration: Input Voltage: 208V (for 3-phase input) The GXT5 can also be configured to operate at 120V AC (single-phase) when needed, making it flexible for different types of equipment and power requirements. 3. Topology: On-Line Double-Conversion: The GXT5 series uses double-conversion (On-Line) topology, providing the highest level of protection. This topology ensures that the UPS continuously filters and conditions the input power and provides a pure sinewave output to sensitive loads, completely isolating the load from power disturbances. Zero transfer time from utility power to battery power ensures no downtime for connected equipment. 4. Waveform Type: Pure Sinewave Output: The UPS produces a clean, pure sinewave output which is essential for powering sensitive IT equipment without distortion or interference. 5. Battery Type and Runtime: Battery Type: Typically uses Sealed Lead-Acid (SLA) or VRLA (Valve-Regulated Lead-Acid) batteries, which require little maintenance and are commonly used in high-performance UPS systems. External Battery Support: The Liebert GXT5-20KMVRT11UXLN supports external battery packs (available separately) to extend runtime for longer periods, making it ideal for power-hungry or mission-critical applications. Charging Time: Typically, it takes about 4-6 hours to recharge the batteries to 90% capacity. 6. Runtime (Backup Time): The battery backup time will vary depending on the load. Here are some estimates: At 50% load (10kVA/10000W): Backup time could range between 15 to 25 minutes. At full load (20kVA/16000W): Backup time would be much shorter, around 5-10 minutes depending on configuration and battery capacity. Extended runtime can be achieved with additional external battery cabinets. 7. Cooling: Fan-assisted cooling ensures optimal temperature management during operation. The UPS is designed to operate efficiently even in environments with higher ambient temperatures. 8. Form Factor: Rackmount and Tower: The Liebert GXT5-20KMVRT11UXLN offers a flexible design, enabling it to be deployed as either a tower or a rackmount UPS. Rackmount form factor: 3U (for the rack version), designed for 19-inch rack installations. The rackmount option allows easy integration into standard server racks or data center environments. 9. Energy Efficiency and Certifications: Energy Star Certification: The Liebert GXT5 is Energy Star certified, meaning it meets high-efficiency standards and minimizes energy consumption during operation. It also has low total cost of ownership (TCO), thanks to its energy-efficient operation. High Efficiency Mode (Eco Mode): The UPS features an eco mode for high-efficiency operation during normal conditions, further reducing energy consumption when conditions permit. 10. Interfaces and Monitoring: LCD Display: The UPS comes with an LCD display that provides real-time information on key parameters such as input/output voltage, battery charge, load levels, and alarm status. Connectivity: USB, Serial, and Network Ports: The GXT5-20KMVRT11UXLN has USB and serial communication ports for local management and monitoring. SNMP Slot: It comes with an optional SNMP card for remote monitoring, allowing you to manage the UPS from anywhere on the network. Dry Contact Interface: Available for integration with building management or alert systems. 11. Advanced Features: Automatic Transfer Switch (ATS): The Liebert GXT5 can support an optional ATS for automatic switching between the utility power and the UPS in the event of a failure, ensuring seamless power continuity. Overload and Short-Circuit Protection: Protects the UPS and connected loads in case of an overload or short circuit by gracefully shutting down the system or providing alarms. Smart Battery Management: The system features battery monitoring to optimize charging cycles and extend the life of the battery bank. Battery health diagnostics help predict and prevent potential failures. Audible Alarms: Provides alerts for low battery, overload, power failure, and other system faults, ensuring that you’re always aware of the UPS condition.

The Amaron Quanta SMF Battery 12V 130Ah, commonly referred to as the 12AL130, is a sealed maintenance-free (SMF) valve-regulated lead-acid (VRLA) battery designed for high performance and reliability. This battery is particularly suitable for applications requiring substantial backup power, such as uninterruptible power supply (UPS) systems, inverters, and other critical power needs. Below are the detailed specifications and features of this battery: Product Overview Type: Lead Acid Battery Model: Amaron Quanta 12V/130Ah (12AL130) Voltage: 12 Volts Capacity: 130 Amp-hours (Ah) Weight: Approximately 38 kg (weight may vary slightly based on the manufacturer) Dimensions: Typically around 33 cm x 17.5 cm x 21.5 cm (exact dimensions may vary slightly) Key Features Sealed Maintenance-Free (SMF): The battery is designed to be maintenance-free, eliminating the need for regular checks or maintenance. Valve-Regulated: The VRLA technology prevents spillage and allows for safe operation in various positions. Long Life: Engineered for durability and longevity, making it suitable for demanding backup power applications. High Performance: Provides reliable power during outages, making it ideal for UPS systems and inverters. Quick Recharge: Capable of fast charging, reducing downtime. Low Self-Discharge Rate: Retains charge for longer periods when not in use. Robust Construction: Designed to withstand harsh environmental conditions and provide consistent performance. Applications Uninterruptible Power Supply (UPS): Ideal for both home and commercial UPS systems. Inverters: Works effectively with various inverter systems for reliable backup power. Data Centers: Suitable for critical applications requiring uninterrupted power. Telecommunication Systems: Used in telecom applications needing dependable power. Industrial Equipment: Supports various industrial applications requiring stable power. Security Systems: Ideal for fire alarm systems and other security devices. Warranty & Support Warranty: Typically comes with a warranty period of 24 months (specifics may vary by retailer). Customer Support: Available through authorized service centers and online platforms. Shipping & Delivery Shipping: Usually calculated at checkout; check with the vendor for shipping options. Delivery Time: Generally within 3-10 working days, depending on location. Same Day Delivery: Available in select areas. Additional Information The Amaron Quanta 12V 130Ah battery is recognized for its reliability and efficiency, making it a preferred choice for consumers looking for a robust power backup solution. It is designed to provide consistent performance over its lifespan, making it suitable for a variety of demanding applications.

Vertiv offers a range of Uninterruptible Power Supply (UPS) systems with capacities of 1 kVA, 2 kVA, and 3 kVA. These UPS systems are designed to provide reliable power protection and high performance for critical applications . Key Features: High efficiency: Up to 95% efficiency in double conversion mode High power density: Compact design with high power density Flexibility: Modular design for easy scalability and flexibility Reliability: Built-in redundancy and hot-swappable components for high reliability Monitoring: Advanced monitoring and control capabilities Vertiv Liebert ITA2 UPS: The Vertiv Liebert ITA2 UPS is a 1-3 kVA UPS system designed for small to medium-sized data centers and edge computing applications. It features a compact design, high efficiency, and advanced monitoring and control capabilities. The Liebert ITA2 UPS is available in 1 kVA, 2 kVA, and 3 kVA models. Benefits: Reliable power protection for critical applications High efficiency and low total cost of ownership Flexible and scalable design for easy upgrades and expansion Advanced monitoring and control capabilities for easy management Technical Specifications: Input voltage: 230V AC Output voltage: 230V AC Frequency: 50/60 Hz Efficiency: Up to 95% in double conversion mode Power factor: 0.9 Battery type: Valve-regulated lead-acid (VRLA) batteries Battery life: Up to 5 years Warranty and Support: Standard warranty: 2 years Extended warranty options available 24/7 technical support and service available

The Amaron Quanta 12V 120Ah SMF battery is a Sealed Maintenance Free (SMF) VRLA battery designed for UPS applications. It has a nominal voltage of 12 volts and a rated capacity of 120 Ah . Product Details: Capacity: 12V 120Ah Battery Type: SMF (Sealed Maintenance Free) Brand: Amaron Filled Weight: 30.0 kg Dimensions: 483x171x220 mm Battery Voltage: 12 V Item Code: 12AL120 Items in Pack: 1 Piece Key Features: Reliable power and long-lasting performance Maintenance-free operation Ideal for UPS and inverter applications ECO Friendly Advanced AGM Valve Regulated technology Lowest carbon footprint Suitable for Fast charging Sealed maintenance-free battery Standby Use and Cyclic Use: Standby Use: Charging Voltage 13.5V/Battery Cyclic Use: Charging Voltage 13.8V/Battery Warranty: Warranty Period: 24 months Warranty Details: 24 months manufacturing warranty applicable

The Amaron Quanta 12V 200Ah SMF (Sealed Maintenance Free) battery is a high-capacity lead-acid battery designed for various demanding applications, including UPS systems, solar energy storage, and industrial use. Here’s a comprehensive overview of its specifications and features: Specifications Type: Sealed Maintenance Free (SMF) Lead-Acid Battery Voltage: 12 Volts Capacity: 200 Ampere-hours (Ah) Dimensions: Approximately 522mm (L) x 238mm (W) x 218mm (H) (dimensions may vary slightly by model) Weight: Around 60 kg (approximate, may vary) Key Features Maintenance-Free Design: No need for regular maintenance like water topping; designed for hassle-free operation. Sealed Construction: Prevents leakage of electrolytes and enhances safety, suitable for indoor and outdoor use. High Reliability: Engineered for consistent and dependable performance, especially in critical applications. Deep Cycle Performance: Capable of handling deep discharge cycles, making it ideal for backup and renewable energy applications. Wide Temperature Range: Operates effectively across a broad temperature range, ensuring versatility in various environments. Applications Uninterruptible Power Supply (UPS): Widely used to provide backup power to critical systems like computers and servers. Solar Power Systems: Ideal for energy storage in solar installations. Telecommunications: Used in telecom networks where reliable power is essential. Industrial Applications: Suitable for various industrial machinery and equipment. Electric Vehicles: Sometimes used in certain electric vehicle applications. Advantages Long Service Life: Offers a longer lifespan compared to traditional lead-acid batteries. Low Self-Discharge Rate: Maintains charge for extended periods when not in use. Environmentally Friendly: Designed with features to minimize environmental impact and ensure safe operation. Maintenance Tips Regular Checks: While it’s maintenance-free, periodic inspections for corrosion and connection integrity are advisable. Storage: Store in a cool, dry place and keep it charged to maintain optimal performance. Warranty Typically includes a warranty ranging from 12 to 24 months, depending on the retailer and specific terms. Conclusion The Amaron Quanta 12V 200Ah SMF battery is an excellent choice for high-demand power backup applications, combining reliability, efficiency, and low maintenance.

The Emeson 3kVA Online UPS is a robust uninterruptible power supply designed to provide reliable power protection for critical equipment. Here are the key details and features typically associated with such a UPS: Specifications Capacity: 3kVA (kilovolt-amps) Input Voltage: Usually supports a wide range, often around 170V to 300V AC. Output Voltage: Typically provides a stable 220V/230V AC output. Output Waveform: Pure sine wave, ensuring compatibility with sensitive electronics. Input Frequency: Commonly 50/60 Hz auto-sensing. Features Online Double-Conversion Technology: Converts incoming AC to DC and then back to AC, providing isolation from power anomalies. LCD Display: Provides real-time information on battery status, load, input/output voltage, and other parameters. Battery Type: Usually utilizes sealed lead-acid or lithium-ion batteries, depending on the model. Charging Time: Often takes around 4 to 8 hours for a full charge. Runtime: Varies based on load and battery configuration, typically offering several minutes to hours of backup. Protection Features Overload Protection: Automatically shuts down if the load exceeds the rated capacity. Short-Circuit Protection: Prevents damage in case of a short circuit. Surge Protection: Shields connected devices from voltage spikes. Temperature Control: Many models include thermal protection to prevent overheating. Connectivity Output Sockets: Multiple outlets for connecting various devices. Communication Ports: USB, RS232, or SNMP for monitoring and management. Battery Management System: Monitors battery health and optimizes charging cycles. Applications Ideal for: Computers and servers Networking equipment Medical devices Industrial applications Installation & Maintenance Installation: Typically requires a professional for optimal setup. Maintenance: Regular checks of battery health and connections recommended. Warranty Often comes with a manufacturer’s warranty, typically ranging from 1 to 3 years, depending on the terms.