Home> Products> client place

{ "products": [ { "_id": "67d5328fdb7fc0f04f83af80", "fptag": "UNIVERSALPOWERSYSTEMF82C", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Battery Replacement In Faridabad", "description": "Battery replacement is a common maintenance task for various types of power systems, including solar systems, electric vehicles (EVs), UPS (uninterruptible power supplies), and other battery-powered devices. The process and requirements can vary depending on the type of battery used. Below, I'll provide an overview of common types of batteries and the replacement process for each.\n\nTypes of Batteries and Their Replacement Process\n1. Lead-Acid Batteries\nCommon Types:\nFlooded Lead-Acid (FLA): Requires regular maintenance, such as adding distilled water to the cells.\nSealed Lead-Acid (SLA): Maintenance-free and does not require water addition.\nAbsorbent Glass Mat (AGM): A type of SLA battery where the electrolyte is absorbed in glass mats.\nGel Lead-Acid Batteries: These use a gel electrolyte instead of liquid and are often used in deep-cycle applications.\nReplacement Process:\nTurn off the system: Ensure the system is powered off, and disconnect it from the grid or load.\nSafety precautions: Wear protective gear, including gloves and goggles, since lead-acid batteries contain sulfuric acid and produce flammable gases.\nDisconnect terminals: Always disconnect the negative terminal first, followed by the positive terminal.\nRemove old batteries: Lift and remove the batteries carefully, especially if they're heavy.\nClean battery terminals: Inspect and clean the terminals, and remove any corrosion using a mixture of baking soda and water.\nInstall new batteries: Place the new battery in the same configuration as the old one, then reconnect the positive terminal first, followed by the negative terminal.\nCheck the system: Power on the system and check the voltage and charging status.\nMaintenance Tips:\nRegularly check the electrolyte levels in flooded batteries.\nClean terminals and ensure the battery box or tray is secure.\n2. Lithium-Ion Batteries\nCommon Types:\nLithium Iron Phosphate (LiFePO4): Common in solar systems and EVs due to its high efficiency and long lifespan.\nLithium Nickel Manganese Cobalt (NMC): Found in high-power applications such as EVs and power tools.\nLithium Manganese (LiMn2O4): Often used in EVs, power tools, and other high-power applications.\nLithium Polymer (LiPo): Typically used in small devices like drones, power banks, and mobile phones.\nReplacement Process:\nTurn off the system: Disconnect the power source or system.\nSafety precautions: Lithium-ion batteries are generally safe but should be handled carefully to avoid overheating, short-circuiting, or damage.\nDisconnect terminals: Start by disconnecting the negative terminal followed by the positive terminal.\nRemove the old battery: Lithium-ion batteries are typically lighter and easier to replace than lead-acid batteries.\nInstall the new battery: Place the new battery in the same orientation and secure it.\nReconnect terminals: Attach the positive terminal first, followed by the negative terminal.\nCheck the system: Power on the system, and monitor the battery's charging and discharging to ensure it's working properly.\nMaintenance Tips:\nLithium-ion batteries require minimal maintenance, but always ensure they are charged within the recommended voltage range.\nBattery Management System (BMS) should be monitored to ensure proper functioning and safety.\n\nConclusion:\nBattery replacement depends on the type of battery and the application. For solar systems, lead-acid, and lithium-ion are the most common, each requiring specific attention during installation.\n\nLead-acid batteries need regular maintenance, especially flooded types.\nLithium-ion batteries are easier to replace and have a longer lifespan with minimal maintenance.\nAlways follow safety guidelines when handling batteries, especially lead-acid or lithium-ion, and ensure proper recycling and disposal of old batteries to avoid environmental hazards.", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "system disconnect", "common types", "system ensure", "replacement process", "battery place", "battery box", "electrolyte levels", "gel electrolyte", "sla battery", "battery replacement", "system power", "handling batteries", "longer lifespan", "batterys charging", "typically lighter", "handled carefully", "generally safe", "small devices", "highpower applications", "high efficiency", "evs due", "batteries place", "baking soda", "batteries carefully", "batteries lift", "sulfuric acid", "ill provide", "vary depending", "batterypowered devices", "faridabadbattery replacement", "minimal maintenance", "regular maintenance", "power source", "leadacid batteries", "power systems", "solar systems", "positive terminal", "water install", "negative terminal", "battery lithiumion batteries", "leadacid batteries install", "reconnect terminals attach", "positive terminal remove", "solar systems leadacid", "evs power tools", "negative terminal check", "common maintenance task", "installation leadacid batteries", "ensure proper recycling", "ensure proper functioning", "drones power banks", "adding distilled water", "avoid environmental hazards", "follow safety guidelines", "requiring specific attention", "avoid overheating shortcircuiting" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 231, "imageuri": "https://bizimages.withfloats.com/actual/756776d6ee8c4f8582dbba63d6dc5e49.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/756776d6ee8c4f8582dbba63d6dc5e49.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2025-03-15T07:55:59.544Z", "updatedon": "0001-01-01T00:00:00Z", "buyonlinelink": null, "producturl": "https://LOCATIONS.UNIVERSALPOWER.CO.IN/BHIWADI/products/battery-replacement-in-faridabad/231", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": null, "category": "Battery Replacement In Faridabad", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": null, "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "671b5d321b61480021549fc2", "fptag": "UNIVERSALPOWERSYSTEMF82C", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Online Ups Amc Repair & Services In Manesar", "description": "As a leading provider of UPS services, we understand the criticality of uninterrupted power supply for your business. Our team of highly skilled technicians is dedicated to delivering efficient and reliable online UPS services in Gurgaon, Delhi, Noida, Bawal, Bhiwadi, Manesar, Sonipat , Faridabad .\n\nWith our expertise and experience, we offer comprehensive solutions for online UPS installation, maintenance, and repair. Whether you are looking for a new installation or need assistance with troubleshooting and repairs, we have got you covered.\n\nUPS Repair & Services In Manesar\n\nWe specialize in UPS Repair & Services in Gurgaon, Delhi, Noida, Bawal, Bhiwadi, Manesar, Sonipat , Faridabad . offering professional troubleshooting and repair. Our team is equipped to handle issues of any scale, ensuring your UPS systems are always in top working condition.\n\nMaintenance Contract\n\nAfter entering into AMC, the contract will do the 1st preventive maintenance to check UPS condition, Healthy and working UPS only will be considered under AMC and also Faulty will be repaired on chargeable basis before considering it under AMC.\nIf the batteries are found faulty at the time of inspection it will have to be replaced before taking it under AMC.\nAny make, any capacity (expect Vertiv & Emerson) Unlimited Break Down calls (Except Wire wound components, batteries, transformers).\nIncludes 100% labor and travel coverage 6 days/week, 8 hours/day.\nPerformed by ACCESS factory trained Customer Engineers.\nBreak down calls – UNLIMITED.\nSubject to all Terms & Conditions as noted in the ACCESS Maintenance Agreement.\n8 Hours Turnaround Time.\n\nPreventive Service\n\nPreventive Measurement : 4 PM per year Cleaning up of Unit, Visual Inspection tocheck any deformation.\nChecking and Adjustment (If needed) of Power parameters like input. Output, DC voltage & Current.\nChecking and Adjustment (If needed) of Control parameters on different PCBs.\nTightness of all connections, if shut down possible.\nFunctional Checking up of Rectifier section.\nFunctional Checking up of Inverter section.\nFunctional Checking up of Static Switch Section.\nWith customer approval, perform operational tests of the system including unit transfer and battery discharge.\nMaintaining the posted checklist at the client place.\nBattery Health checks with Multi Meter.\n\nBattery AMC\n\nIntroducing for the very first time in the Industry “Battery AMC”, wherein you get your additional 3rd year warranty only @15% of your previous pay for the batteries.\n\nQuanta Amaron Make of battery is only included in AMC.\nBattery should be within the warranty period.\nCurrently AMC will be carried forward only for Gurgaon, Delhi, Noida, Bawal, Bhiwadi, Manesar, Sonipat , Faridabad . Region.\n\nUPS Renting\n\nCost Effective: Rental UPS is very cost effective, you can save on huge project costs.\nPower Stability: Provides stable power continuously and saves all your expensive equipment from Power Surges.\nNo Minimum Requirements: Online UPS available from 1KVA to 600 KVA on rent for short & long term.\nNo Maintenance Cost: UPS Rental helps you save on maintenance & Servicing cost.\nCustomisable: Special customization facility available for your specific needs.\nNo Power Cuts: Battery life is always ON, due to immediate replacement facility.\n\nMaintenance Contracts\n\nOn line ups in each kVA rating and battery backup system are very sensitive issues and so it should be taken care utmost to enhance the life of UPS system and battery life for almost 99% up time during performance. Access Power Link is a leader in this market for 25 years having expertise and experience in the field to ensure hassle-free UPS AMC services on PAN INDIA level.\n\n\nUPS Servicing To Suit You\n\nOur response time is the time to get to site, not the time for a callback Travel and labour is included in all contract prices unless not required\nOur technical support is offered by actual UPS experts, not a call centre.\nOur inclusive parts contracts include ALL parts not just “consumables”.\nOur preventative maintenance includes multipoint checks not just visuals.\nWe offer different plans to pass on savings during normal working hours.", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "4 PM", "600 KVA", "25 years", "long term", "ALL parts", "100% labor", "Amc Repair", "kVA rating", "first time", "UPS Repair", "DC voltage", "UPS Rental", "Rental UPS", "Battery AMC", "call centre", "Multi Meter", "Cleaning up", "UPS Renting", "UPS systems", "Battery life", "previous pay", "client place", "Power Surges", "stable power", "unit transfer", "response time", "UPS Servicing", "UPS condition", "No Power Cuts", "specific needs", "Servicing cost", "different PCBs", "ACCESS factory", "contract prices", "different plans", "callback Travel", "travel coverage", "Power Stability", "warranty period", "PAN INDIA level", "sensitive issues", "Maintenance Cost", "chargeable basis", "leading provider", "Inverter section", "Power parameters", "new installation", "Visual Inspection", "technical support", "battery discharge", "operational tests", "customer approval", "Rectifier section", "multipoint checks", "Access Power Link", "Control parameters", "Customer Engineers", "Preventive Service", "Quanta Amaron Make", "actual UPS experts", "huge project costs", "Functional Checking", "expensive equipment", "skilled technicians", "Minimum Requirements", "normal working hours", "Maintenance Contracts", "battery backup system", "Battery Health checks", "Static Switch Section", "top working condition", "Wire wound components", "Preventive Measurement", "comprehensive solutions", "online UPS installation", "8 Hours Turnaround Time", "preventative maintenance", "inclusive parts contracts", "1st preventive maintenance", "uninterrupted power supply", "Unlimited Break Down calls", "professional troubleshooting", "ACCESS Maintenance Agreement", "hassle-free UPS AMC services", "reliable online UPS services", "additional 3rd year warranty", "immediate replacement facility", "Special customization facility" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 116, "imageuri": "https://bizimages.withfloats.com/actual/84f8b6b04e1b48d49747ad9567450757.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/84f8b6b04e1b48d49747ad9567450757.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-10-25T08:56:18.006Z", "updatedon": "2024-10-25T08:56:18.006Z", "buyonlinelink": null, "producturl": "https://LOCATIONS.UNIVERSALPOWER.CO.IN/BHIWADI/products/online-ups-amc-repair-services-in-manesar/116", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": null, "category": "Online Ups Amc Repair & Services", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "670e1915dd222815d55888da", "fptag": "UNIVERSALPOWERSYSTEMF82C", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "AMC FOR ALL TYPES UPS & BATTERIES , INVERTER IN BINOLA MANESAR", "description": "Looking for Inverter, UPS, Battery AMC\n\nUniversal Power System comprehensive UPS AMC and battery service solutions which are designed to improve costs, uptime, reliability, power quality and safety. Our Service Include: UPS Installation and Commissioning, Battery Replacement, Battery Testing and Maintenance, UPS Maintenance and Service Contracts, Project Management, Warranty Upgrade. In India and network of highly experienced contractors we can support clients in Gurgaon, Delhi, Noida , Bawal , Bhiwadi , Manesar , Sonipat , Faridabad and all around India.\n\n\nThis comprehensive Annual Maintenance Contract for Home UPS and Corporates provides peace of mind to the customer as the service contract covers regular PMs (Preventive Maintenance) and unlimited breakdown calls during the contract period. Any replacement of spares is free of cost during the contract period and excludes batteries.\n\nAMC for Home UPS\n\nWith a multitude of convenience products in today’s modern homes, Annual Maintenance Contract (AMC) is critical not only for the product but also for customers who have invested on the product. There are a host of benefits when you opt for Annual Maintenance Contract:\n\nNo need to remember dates. No need to call us. We store your product details in our database.\n\nOur team of professionals visit once every 6 months automatically to check & maintain the health of your gadget. (Both Home UPS & Battery provided you have opted for an AMC for both)\n\nEven after expiry of warranty for your product, you can opt for Annual Maintenance Contract.\n\nScope of Home UPS AMC\n\nUnder Annual Maintenance Contract Program, the Home UPS & Batteries are included provided you opt for separate AMC’s for both.\n\nPCB’s, IGBT/SCR, Switches, Fans, Capacitors & LCD display will be replaced free of cost if there is any failure Chassis & wheels are not covered and shall be charged extra at actual.\n\nPls write your Home UPS AMC requirements to info@universalpower.co.in we have different packages for all Range of batteries and UPS\n\nOnline/Offline/Interactive UPS Maintenance Contracts for Corporates\n\nHere at Critical Power Supplies, we offer a comprehensive maintenance plan for our customers, including customisable options for your site. As leading brand service engineers, we have earned an enviable reputation for our UPS service, and boast premier power protection plans. For access to the very best in the industry, take out one of our UPS maintenance plans today and ensure that your business stays safe. As UPS systems support critical applications we believe that through planned maintenance and effective battery testing we can ensure the reliability of your backup system. We strive to offer a professional, reliable and trusted service so our customers continue to benefit from our support for the life of their system.\n\n\n", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "TYPES UPS", "LCD display", "regular PMs", "Battery AMC", "UPS systems", "UPS service", "separate AMC", "modern homes", "backup system", "power quality", "BINOLA MANESAR", "product details", "trusted service", "contract period", "Warranty Upgrade", "UPS Installation", "Service Contracts", "different packages", "Project Management", "Battery Replacement", "enviable reputation", "customisable options", "convenience products", "critical applications", "comprehensive UPS AMC", "UPS maintenance plans", "professional, reliable", "Preventive Maintenance", "Universal Power System", "experienced contractors", "Critical Power Supplies", "battery service solutions", "effective battery testing", "unlimited breakdown calls", "Home UPS AMC requirements", "comprehensive maintenance plan", "premier power protection plans", "leading brand service engineers", "Annual Maintenance Contract Program", "comprehensive Annual Maintenance Contract", "Offline/Interactive UPS Maintenance Contracts" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 49, "imageuri": "https://bizimages.withfloats.com/actual/d7362dd9b54c46169f6b5bfebb415a42.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/d7362dd9b54c46169f6b5bfebb415a42.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-10-15T07:26:13.945Z", "updatedon": "2024-10-15T07:26:13.945Z", "buyonlinelink": null, "producturl": "https://LOCATIONS.UNIVERSALPOWER.CO.IN/BHIWADI/products/amc-for-all-types-ups-batteries-inverter-in-binola-manesar/49", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "", "category": "AMC FOR ALL TYPES UPS & BATTERIES , INVERTER", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "67de50f12d762c4c27178365", "fptag": "UNIVERSALPOWERSYSTEMF82C", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Amaron Quanta 12v 42Ah Battery", "description": "The Amaron Quanta 42Ah (Ampere-hour) battery is a high-performance, maintenance-free lead-acid battery designed for use in UPS systems, inverters, and solar energy storage applications. It provides reliable power backup for a range of devices, especially in environments where power stability and uninterrupted performance are crucial.\n\nKey Features of Amaron Quanta 42Ah Battery:\nCapacity:\n\n42Ah (Ampere-hour) – This means the battery can provide 42 amps of current for one hour, or a proportionally smaller amount of current over a longer period of time, depending on the load.\n\nTechnology:\n\nMaintenance-Free: The Amaron Quanta series batteries are sealed lead-acid batteries (SLA) that do not require frequent maintenance or water refilling, making them very convenient and hassle-free.\n\nHigh Performance: Designed for high efficiency, the Amaron Quanta 42Ah battery offers good charge retention, ensuring long-lasting backup for your UPS or inverter.\n\nDeep Cycle Battery:\n\nThis is a deep-cycle battery, meaning it is designed to handle deeper discharges compared to regular car batteries. It is well-suited for applications where the battery may be discharged and recharged frequently.\n\nDurability:\n\nLong Shelf Life: Amaron Quanta batteries have a good shelf life and can perform well over extended periods when properly stored.\n\nHigh-Temperature Tolerance: They are built to withstand a wide range of temperatures, making them suitable for varying environmental conditions.\n\nDesign:\n\nCompact and Reliable: The battery is designed to be compact, reliable, and easy to install, especially in environments where space is a concern.\n\nVibration Resistant: The battery is engineered to resist damage from vibration, ensuring its durability in various settings.\n\nSafety Features:\n\nFlame-Retardant Materials: The Amaron Quanta 42Ah battery uses flame-retardant materials to ensure safety in case of battery malfunction.\n\nLeak-Proof: Being a sealed battery, it minimizes the risk of acid leakage, which adds an extra layer of safety.\n\nApplication Areas:\n\nUPS Systems: Provides backup power to computers, servers, and networking equipment.\n\nInverter Systems: Used in residential and small commercial applications to ensure uninterrupted power during outages.\n\nSolar Energy Storage: Can be used as part of a solar energy storage system to store excess energy generated during the day for use at night.\n\nWarranty:\n\nThe Amaron Quanta batteries often come with a 2-year warranty, depending on the region and purchase conditions. It is recommended to check with the seller or manufacturer for specific warranty details.\n\nGeneral Specifications:\nVoltage: 12V (standard for most UPS and inverter batteries).\n\nCapacity: 42Ah.\n\nType: Sealed Lead-Acid (SLA) or AGM (Absorbent Glass Mat).\n\nCharging Voltage: Typically around 14.4 to 15.0V for 12V batteries.\n\nNominal Voltage: 12V.\n\nDimensions: Typically around length: 200mm, width: 165mm, height: 175mm (varies slightly depending on specific model).\n\nWeight: Approximately 12-14 kg.\n\nMaintenance Tips for the Amaron Quanta 42Ah Battery:\nRegular Charging: Always ensure that the battery is fully charged and avoid discharging it completely to extend its lifespan.\n\nStorage: If you’re storing the battery for an extended period, make sure to store it in a cool, dry place and check the charge level periodically.\n\nClean the Terminals: Ensure the terminals are clean and free of corrosion. Clean the terminals with a mixture of baking soda and water if needed.\n\nAvoid Overcharging: Always use a compatible charger to avoid overcharging the battery, which could damage it.\n\nCheck for Leakage: While the battery is sealed, it's a good idea to check for any leaks, especially if the battery has been in use for a long time or is showing signs of wear.\n\nBattery Testing:\nTo check the health of the Amaron Quanta 42Ah battery, you can follow these steps:\n\nVoltage Check: Use a voltmeter to check the voltage. A fully charged 12V battery should show between 12.6V to 12.8V.\n\nLoad Test: Under load, if the voltage drops rapidly below 10.5V for a 12V battery, it may be a sign of degradation.\n\nCapacity Test: If your application requires it, you can perform a discharge test to check the battery's capacity. This involves discharging the battery with a known load and measuring how long it takes for the voltage to drop below a certain threshold.\n\nConclusion:\nThe Amaron Quanta 42Ah battery is a reliable and durable option for providing backup power in various applications, including UPS systems, inverters, and solar power storage. It offers maintenance-free operation, a long service life, and excellent temperature tolerance. By regularly maintaining and testing the battery, you can ensure that it continues to perform effectively over time.", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 249, "imageuri": "https://bizimages.withfloats.com/actual/1d085d444be04b38886a66b6877f7848.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/6ffad887d34b4ebd8fcc808aeb3d9a29.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2025-03-22T05:56:01.145Z", "updatedon": "0001-01-01T00:00:00Z", "buyonlinelink": null, "producturl": "https://LOCATIONS.UNIVERSALPOWER.CO.IN/BHIWADI/products/amaron-quanta-12v-42ah-battery/249", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": null, "category": "Amaron Quanta 12v 42Ah Battery", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": null, "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "67de4bd9042ffb8bd0390aa7", "fptag": "UNIVERSALPOWERSYSTEMF82C", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Powerstack battery Testing ", "description": "Powerstack batteries, typically used in UPS systems, inverters, and other energy storage applications, require proper testing and maintenance to ensure their efficiency, longevity, and reliability. If you need to perform battery testing on a Powerstack battery, here's a general guide for testing and monitoring its condition:\n\nSteps to Test Powerstack Batteries:\n1. Visual Inspection\nCheck for Physical Damage: Inspect the battery casing for any cracks, leaks, or bulges. Damaged batteries should be replaced.\n\nClean the Terminals: Ensure the terminals are clean and free from corrosion. If there is any corrosion, clean the terminals with a mixture of baking soda and water.\n\n2. Check Battery Voltage\nMeasure the Open-Circuit Voltage (OCV): Use a digital voltmeter to measure the voltage across the battery terminals when it is not connected to any load. Compare the measured voltage to the battery’s rated voltage. A typical fully charged 12V lead-acid battery should read around 12.6 to 12.8 volts.\n\nFor a 24V battery, you should see a voltage of around 25.2 to 26.0 volts.\n\nUndercharged Battery: If the voltage is significantly lower (e.g., 10.5V or less for a 12V battery), it may indicate that the battery is undercharged or faulty.\n\n3. Load Testing\nTest under Load: Apply a load to the battery, simulating its normal working conditions. The load can be an inverter or UPS system that draws power from the battery. Monitor the voltage drop under load. The voltage should not drop drastically; otherwise, it may indicate that the battery is aging or weak.\n\nDC Discharge Test: If you have access to a battery analyzer or tester, you can perform a discharge test by applying a constant load and measuring the time it takes for the battery to reach a certain voltage cutoff.\n\n4. Battery Charge Test\nCharge the Battery Fully: Use the manufacturer’s recommended charger to fully charge the battery. Most Powerstack systems will charge to full capacity in 6-12 hours, depending on the charger and battery size.\n\nMonitor Charging Parameters: If the battery doesn’t charge properly or takes longer than usual, it might indicate problems with the battery or the charger.\n\nEnd of Charge Voltage: For lead-acid batteries, the end-of-charge voltage should be around 14.4 to 15.0 volts for a 12V battery and 28.8 to 30.0 volts for a 24V battery.\n\n5. Conduct a Specific Gravity Test (for Lead-Acid Batteries)\nHydrometer Test: If your Powerstack battery is a lead-acid type, you can measure the specific gravity of the electrolyte inside the battery using a hydrometer. A fully charged battery will have a specific gravity of around 1.265 – 1.280. If the reading is low, it may indicate that one or more cells are faulty.\n\n6. Perform a Battery Health Check (Advanced)\nUse a Battery Tester: There are advanced battery testers that can measure the internal resistance, capacity, and health of the battery. These testers usually simulate various load conditions and measure how well the battery performs.\n\nInternal Resistance: A higher internal resistance indicates aging and reduced capacity. A proper battery tester will show you this resistance reading, which helps in assessing the battery's remaining life.\n\n7. Monitor for Temperature\nBatteries can heat up during charging and discharging. Check for unusual temperature rises that may indicate internal problems. Excessive heat can degrade battery life and may signal an issue with the battery or the charging system.\n\nSigns of a Failing Battery:\nRapid Voltage Drop: If the voltage quickly drops under load, the battery is likely deteriorating.\n\nShort Runtime: If the battery runs out of charge much faster than expected, it could mean it's near the end of its life.\n\nInconsistent Voltage Readings: Large fluctuations in voltage readings, especially when under load, can indicate a failing battery.\n\nPhysical Damage: Swelling, leaks, or any visible damage to the battery indicates that it needs to be replaced.\n\nBattery Maintenance Tips:\nRegular Charging: Avoid deep discharges and always keep the battery charged.\n\nEnvironmental Conditions: Keep the battery in a cool, dry place to avoid overheating or damage due to extreme temperatures.\n\nPeriodic Tests: Test the battery every 3-6 months to assess its health and ensure it’s functioning properly.\n\nUse the Right Charger: Always use the manufacturer's recommended charger to prevent overcharging or undercharging.\n\nConclusion:\nBattery testing is critical for ensuring that your Powerstack battery continues to perform optimally. Regular testing helps in identifying potential problems early and maintaining the battery’s health. Always follow the manufacturer’s instructions and consult with a professional if you're unsure about the testing process.", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 248, "imageuri": "https://bizimages.withfloats.com/actual/7f2c78a976e246efbe70882f742a421a.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/f8db1555dfa447dbb73d3446e6b45940.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2025-03-22T05:34:17.551Z", "updatedon": "0001-01-01T00:00:00Z", "buyonlinelink": null, "producturl": "https://LOCATIONS.UNIVERSALPOWER.CO.IN/BHIWADI/products/powerstack-battery-testing-/248", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": null, "category": "Powerstack battery Testing ", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": null, "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "67de4a9d6f5ecfd85ef84935", "fptag": "UNIVERSALPOWERSYSTEMF82C", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Luminous Ups", "description": "The Luminous LD30KH-PRO is a high-performance Inverter designed to provide reliable backup power for homes, offices, and small commercial setups. It is a part of Luminous' Pure Sine Wave Inverter series, offering high efficiency and stable power supply to sensitive equipment like computers, refrigerators, air conditioners, and other appliances.\n\nHere are the key features and specifications of the Luminous LD30KH-PRO:\n\nKey Features:\nPower Capacity:\n\n30 kVA (Kilovolt-Ampere) – It is designed to support large power loads, making it suitable for medium to large residential, commercial, or industrial applications.\n\nPure Sine Wave Output:\n\nProvides clean and stable output voltage, ensuring that sensitive equipment (like computers, air conditioners, and medical equipment) operates without issues, such as noise or voltage fluctuations.\n\nHigh Efficiency:\n\nThe inverter operates with high efficiency, which reduces power loss and ensures that more of the battery's energy is used to power connected appliances.\n\nAdvanced Microprocessor Technology:\n\nThe inverter uses a microprocessor-based design to ensure high performance, protection, and reliability. It optimizes charging and discharging cycles, as well as load management.\n\nUser-Friendly LCD Display:\n\nIt comes with an intuitive LCD display that shows important information such as battery status, power usage, input and output voltage, and fault conditions. This helps users easily monitor and manage the system.\n\nWide Input Voltage Range:\n\nThe inverter operates with a wide input voltage range, which helps it perform well under varying input conditions. This feature helps protect connected equipment from power surges and fluctuations.\n\nMultiple Protection Mechanisms:\n\nBuilt-in protection features include overload protection, short-circuit protection, deep discharge protection, and battery reverse polarity protection, which ensures the safety of the connected equipment.\n\nBattery Compatibility:\n\nThe Luminous LD30KH-PRO is compatible with both lead-acid and lithium-ion batteries, giving users flexibility depending on their preferences for battery technology.\n\nSmart Battery Management:\n\nThe inverter comes with intelligent battery management to optimize battery performance, extending their lifespan and ensuring safe charging and discharging cycles.\n\nCompact and Reliable Design:\n\nDesigned with a compact form factor and a durable build, the inverter is ideal for both indoor and outdoor installations and can be used for both backup power and off-grid applications.\n\nApplications:\nResidential Homes – For providing backup power for large appliances like air conditioners, refrigerators, lighting, and electronics.\n\nSmall and Medium Businesses – For ensuring uninterrupted power supply to computers, servers, and other essential equipment.\n\nCommercial Use – Ideal for large offices, small industries, and workshops.\n\nRural/Off-Grid Areas – Can be used in places with frequent power outages or no access to the grid, providing a reliable power solution.\n\nSpecifications Summary:\nRated Capacity: 30 kVA\n\nOutput Type: Pure Sine Wave\n\nInput Voltage: 120V – 300V (depending on model)\n\nCharging Current: Adjustable (depends on load)\n\nDisplay: LCD with detailed status updates\n\nBattery Compatibility: Compatible with lead-acid and lithium-ion batteries", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "medium businesses", "lithiumion batteries", "large appliances", "outdoor installations", "durable build", "luminous ld30khpro", "output voltage", "batterys energy", "high efficiency", "inverter operates", "key features", "homes offices", "grid providing", "computers servers", "electronics small", "fault conditions", "optimizes charging", "microprocessorbased design", "sensitive equipment", "power surges", "discharging cycles", "backup power", "highperformance inverter designed", "providing backup power", "reliable design designed", "medical equipment operates", "discharging cycles compact", "essential equipment commercial", "ensuring safe charging", "varying input conditions", "computers air conditioners", "large residential commercial", "small commercial setups", "frequent power outages", "reduces power loss", "stable power supply", "load display lcd", "workshops ruraloffgrid areas", "compact form factor", "intelligent battery management", "shows important information", "intuitive lcd display" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 247, "imageuri": "https://bizimages.withfloats.com/actual/adfcf6a1a7214424b3baeaee446d5f26.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/4b5ca6e9e3154e0992e899bf9f0a3730.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2025-03-22T05:29:01.515Z", "updatedon": "0001-01-01T00:00:00Z", "buyonlinelink": null, "producturl": "https://LOCATIONS.UNIVERSALPOWER.CO.IN/BHIWADI/products/luminous-ups/247", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": null, "category": "Luminous Ups", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": null, "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "67dd41a41d6a77a10da5cc00", "fptag": "UNIVERSALPOWERSYSTEMF82C", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Exide Battery", "description": "Exide Insta Brite is a range of automotive batteries known for providing reliable and high-performance power to vehicles. The Insta Brite series is specially designed to deliver superior cranking power, longer battery life, and low maintenance requirements, making it a popular choice for a wide range of vehicles. Below are the key features and details of Exide Insta Brite batteries:\n\n1. Key Features:\nHigh Cranking Power: Provides excellent starting power for engines, even under extreme weather conditions (both hot and cold).\nMaintenance-Free: Exide Insta Brite batteries are designed to be virtually maintenance-free, reducing the need for constant checks and refills.\nDurability: Built with robust construction to handle tough environments, ensuring a longer lifespan and reliable performance.\nEnhanced Safety: These batteries come with advanced safety features, reducing the risk of leakage or damage.\nShock and Vibration Resistance: Built to withstand shocks and vibrations that are common in automotive applications.\n2. Technology:\nLead-Acid Technology: Like most automotive batteries, Exide Insta Brite uses lead-acid technology, which ensures high performance, reliability, and cost-effectiveness.\nCalcium-Calcium Technology: Some variants of Exide Insta Brite incorporate calcium-calcium technology, which helps in reducing water loss and improving the overall battery performance.\nAdvanced Grid Design: This design improves the efficiency and strength of the battery, enhancing its cranking power and overall battery life.\n3. Types of Vehicles:\nPassenger Cars: Exide Insta Brite is commonly used in standard passenger vehicles like sedans, hatchbacks, and SUVs.\nTwo-Wheelers: Some models are also suitable for motorcycles and scooters.\nCommercial Vehicles: Some higher-capacity variants are suitable for commercial vehicles, including trucks and buses.\n4. Advantages:\nLonger Life: Designed to provide a longer service life, reducing the frequency of replacements.\nExcellent Starting Performance: Ensures smooth engine start-ups, especially in cold weather conditions.\nCost-Effective: Provides great value by offering a balance of performance, durability, and cost.\nEnvironmentally Friendly: Being a lead-acid battery, it is recyclable, making it more eco-friendly than some other types of batteries.\n5. Available Sizes/Models:\nExide Insta Brite batteries come in different sizes and specifications based on the vehicle’s requirements. These sizes are designed to meet the specific needs of the vehicle, whether it is a compact car or a larger commercial vehicle.\n\n6. Warranty:\nExide Insta Brite batteries often come with a manufacturer warranty, typically ranging from 12 months to 36 months depending on the model. The warranty covers manufacturing defects and performance issues, offering peace of mind for the customer.\n\n7. Maintenance:\nLow Maintenance: While it is a maintenance-free battery, users should still check the battery for any physical damage or signs of wear.\nRegular Inspections: It's recommended to periodically check the battery's charge level and connections for safety and optimal performance.\n8. Application Areas:\nAutomotive: Passenger cars, SUVs, and trucks.\nCommercial Vehicles: Larger vehicles such as buses and cargo trucks.\nMotorcycles & Two-Wheelers: Some models are designed for use in motorcycles and scooters.\n9. Price Range:\nThe price of Exide Insta Brite batteries typically ranges from INR 3,000 to INR 10,000 or more, depending on the specific model, size, and vehicle type.\n10. Availability:\nExide Insta Brite batteries are widely available through Exide dealers, automotive battery retailers, and online platforms in various regions.\n11. Popular Models in the Insta Brite Series:\nExide Insta Brite IB 100: Known for high starting power, suitable for a range of vehicles.\nExide Insta Brite IB 120: Offers more power for larger vehicles.\nExide Insta Brite IB 150: Ideal for commercial vehicles, providing reliable performance under heavy load conditions.", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "inr 10000", "inr 3000", "batteries 5", "12 months", "36 months depending", "specially designed", "wide range", "automotive batteries", "periodically check", "highercapacity variants", "online platforms", "physical damage", "compact car", "vehicles requirements", "specifications based", "recyclable making", "leadacid battery", "suvs twowheelers", "sedans hatchbacks", "cranking power", "battery enhancing", "design improves", "withstand shocks", "damage shock", "longer lifespan", "robust construction", "constant checks", "key features", "popular choice", "highperformance power", "providing reliable", "performance durability", "commercial vehicles", "leadacid technology", "specific model size", "scooters commercial vehicles", "maintenancefree battery users", "standard passenger vehicles", "excellent starting power", "costeffectiveness calciumcalcium technology", "refills durability built", "heavy load conditions", "batterys charge level", "wear regular inspections", "cost environmentally friendly", "reducing water loss", "vibration resistance built", "virtually maintenancefree reducing", "extreme weather conditions", "insta brite series" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 243, "imageuri": "https://bizimages.withfloats.com/actual/82ffa45517f2457a94d98f5c15b57c60.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/e4d494d3f2d540c7bc8ec3cf6d092338.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2025-03-21T10:38:28.789Z", "updatedon": "0001-01-01T00:00:00Z", "buyonlinelink": null, "producturl": "https://LOCATIONS.UNIVERSALPOWER.CO.IN/BHIWADI/products/exide-battery/243", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": null, "category": "Exide Battery", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": null, "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "67da5d3df76648ad70e6ba3a", "fptag": "UNIVERSALPOWERSYSTEMF82C", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "ALL TYPES OF UPS REPAIR", "description": "UPS (Uninterruptible Power Supply) repair typically involves diagnosing and fixing issues related to power failures, battery problems, or malfunctioning components. Here are some common repair tasks:\n\nBattery Replacement: Batteries in UPS units degrade over time and may need replacing. This is one of the most common repairs.\n\nPower Supply Issues: Problems with the internal power supply circuit or malfunctioning capacitors can cause a UPS to fail to charge or provide backup power.\n\nOverheating Issues: Dust buildup or fan failure can cause the unit to overheat, requiring cleaning or fan replacement.\n\nInverter and Charger Problems: If the UPS isn't converting DC to AC power properly, it could be an inverter problem. Similarly, charger failures could stop the battery from charging.\n\nInternal Component Replacement: This may involve replacing transformers, fuses, or circuit boards that have failed.", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "circuit boards", "charger problems", "malfunctioning capacitors", "malfunctioning components", "fan failure", "ups units degrade", "fan replacement inverter", "ac power properly", "overheat requiring cleaning", "fixing issues related" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 241, "imageuri": "https://bizimages.withfloats.com/actual/fe43ecd841304e5ba3810dfc414a3e94.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/a3c0b54bac9e4d5bb50f465d5334b3f3.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2025-03-19T05:59:25.313Z", "updatedon": "0001-01-01T00:00:00Z", "buyonlinelink": null, "producturl": "https://LOCATIONS.UNIVERSALPOWER.CO.IN/BHIWADI/products/all-types-of-ups-repair/241", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": null, "category": "ALL TYPES OF UPS REPAIR", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": null, "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "67d905d2a368d6b4e8edd8af", "fptag": "UNIVERSALPOWERSYSTEMF82C", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "VERTIV UPS", "description": "The Liebert APM is a modular, scalable, and flexible Uninterruptible Power Supply (UPS) system from Vertiv (formerly Emerson Network Power). It's designed to provide reliable power protection for a wide range of applications, including IT, industrial, healthcare, and telecommunication environments. The Liebert APM series comes in various power ratings, with the range you mentioned being 30 kW - 300 kW, as well as the smaller 1 to 25 kVA units, offering high flexibility for different power requirements.\n\nKey Features of the Liebert APM Series:\nModular Design:\n\nOne of the standout features of the Liebert APM UPS system is its modular design. This allows users to scale the system based on their current needs and future expansion. The modular units can be added incrementally, making it highly adaptable.\nThis modular approach allows for easy maintenance and upgrades without having to replace the entire UPS unit.\nHigh Efficiency:\n\nThe Liebert APM delivers high efficiency, typically achieving up to 95% or more under normal operating conditions. This efficiency helps reduce operational costs and energy consumption.\nIt also features Eco-mode operation, which optimizes energy savings when operating in non-critical situations without compromising protection.\nCompact and Flexible:\n\nDespite its modular nature, the Liebert APM system has a compact design that fits easily into most data centers and industrial setups, where space can often be at a premium.\nIt can be configured for 1-phase or 3-phase power supply, offering flexibility for different types of loads and systems.\nScalable Power:\n\nThe Liebert APM is available in a range from 1 kVA to 300 kVA, which makes it suitable for small server rooms to large data centers.\nThe system allows for easy scalability by adding additional power modules as needed to meet growing demands.\nFlexible Battery Configurations:\n\nThe UPS system supports a variety of battery configurations, allowing for customization based on your runtime requirements. You can select from different battery types, including VRLA (Valve-Regulated Lead-Acid) and lithium-ion batteries.\nAdvanced Monitoring and Management:\n\nLiebert APM comes with Intelligent Monitoring that provides real-time data on the UPS’s performance, such as input/output voltage, battery status, and efficiency.\nIt supports both local and remote monitoring, ensuring that technicians can be alerted to issues before they become critical problems.\nThe system can be integrated with network management systems (NMS) for centralized control across multiple units.\nDual Input Capability:\n\nSome models of the Liebert APM offer dual input power sources, providing redundancy for critical applications. This feature ensures that the system remains operational even if one power input fails.\nFast Response Time:\n\nThe Liebert APM offers a fast transfer time (typically in the milliseconds), ensuring that sensitive equipment is protected even during brief power outages or voltage fluctuations.\nApplications:\nData Centers: Providing reliable, scalable power protection for server rooms and IT infrastructure.\nIndustrial: Protecting critical manufacturing equipment and automated systems from power interruptions.\nHealthcare: Ensuring medical equipment, including imaging devices, lab instruments, and patient monitoring systems, remain operational during power outages.\nTelecommunications: Keeping communication systems up and running to ensure continuous operation of vital network infrastructure.\nBenefits:\nScalability: The ability to scale up or down as required, which is a huge benefit for growing businesses or changing environments.\nReduced Total Cost of Ownership (TCO): With high efficiency and modularity, the Liebert APM reduces energy consumption and minimizes the cost of maintenance.\nReliability: Known for providing excellent protection against power issues, including surges, spikes, and outages.\nCustomization: Supports different configurations and battery options to meet specific needs, offering flexibility across various industries.\nModels & Power Ratings:\nSmall Power Ratings: For smaller environments or edge computing setups, Liebert APM models ranging from 1 kVA to 25 kVA offer robust protection without being overly complex.\nLarge Power Ratings: For larger industrial or data center applications, the 30 kW to 300 kW versions provide scalable power protection to ensure high availability for critical operations.", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 239, "imageuri": "https://bizimages.withfloats.com/actual/930d91046d2046bb95b2598748fed6f3.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/930d91046d2046bb95b2598748fed6f3.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2025-03-18T05:34:10.095Z", "updatedon": "0001-01-01T00:00:00Z", "buyonlinelink": null, "producturl": "https://LOCATIONS.UNIVERSALPOWER.CO.IN/BHIWADI/products/vertiv-ups/239", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": null, "category": "VERTIV UPS", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": null, "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false } ], "hasmoreitems": false, "isapirequest": false, "totalresults": 27, "query": null, "floatingpoint": null }