Home> Products> monitoring health charge

{ "products": [ { "_id": "67de4bd9042ffb8bd0390aa7", "fptag": "UNIVERSALPOWERSYSTEMF82C", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Powerstack battery Testing ", "description": "Powerstack batteries, typically used in UPS systems, inverters, and other energy storage applications, require proper testing and maintenance to ensure their efficiency, longevity, and reliability. If you need to perform battery testing on a Powerstack battery, here's a general guide for testing and monitoring its condition:\n\nSteps to Test Powerstack Batteries:\n1. Visual Inspection\nCheck for Physical Damage: Inspect the battery casing for any cracks, leaks, or bulges. Damaged batteries should be replaced.\n\nClean the Terminals: Ensure the terminals are clean and free from corrosion. If there is any corrosion, clean the terminals with a mixture of baking soda and water.\n\n2. Check Battery Voltage\nMeasure the Open-Circuit Voltage (OCV): Use a digital voltmeter to measure the voltage across the battery terminals when it is not connected to any load. Compare the measured voltage to the battery’s rated voltage. A typical fully charged 12V lead-acid battery should read around 12.6 to 12.8 volts.\n\nFor a 24V battery, you should see a voltage of around 25.2 to 26.0 volts.\n\nUndercharged Battery: If the voltage is significantly lower (e.g., 10.5V or less for a 12V battery), it may indicate that the battery is undercharged or faulty.\n\n3. Load Testing\nTest under Load: Apply a load to the battery, simulating its normal working conditions. The load can be an inverter or UPS system that draws power from the battery. Monitor the voltage drop under load. The voltage should not drop drastically; otherwise, it may indicate that the battery is aging or weak.\n\nDC Discharge Test: If you have access to a battery analyzer or tester, you can perform a discharge test by applying a constant load and measuring the time it takes for the battery to reach a certain voltage cutoff.\n\n4. Battery Charge Test\nCharge the Battery Fully: Use the manufacturer’s recommended charger to fully charge the battery. Most Powerstack systems will charge to full capacity in 6-12 hours, depending on the charger and battery size.\n\nMonitor Charging Parameters: If the battery doesn’t charge properly or takes longer than usual, it might indicate problems with the battery or the charger.\n\nEnd of Charge Voltage: For lead-acid batteries, the end-of-charge voltage should be around 14.4 to 15.0 volts for a 12V battery and 28.8 to 30.0 volts for a 24V battery.\n\n5. Conduct a Specific Gravity Test (for Lead-Acid Batteries)\nHydrometer Test: If your Powerstack battery is a lead-acid type, you can measure the specific gravity of the electrolyte inside the battery using a hydrometer. A fully charged battery will have a specific gravity of around 1.265 – 1.280. If the reading is low, it may indicate that one or more cells are faulty.\n\n6. Perform a Battery Health Check (Advanced)\nUse a Battery Tester: There are advanced battery testers that can measure the internal resistance, capacity, and health of the battery. These testers usually simulate various load conditions and measure how well the battery performs.\n\nInternal Resistance: A higher internal resistance indicates aging and reduced capacity. A proper battery tester will show you this resistance reading, which helps in assessing the battery's remaining life.\n\n7. Monitor for Temperature\nBatteries can heat up during charging and discharging. Check for unusual temperature rises that may indicate internal problems. Excessive heat can degrade battery life and may signal an issue with the battery or the charging system.\n\nSigns of a Failing Battery:\nRapid Voltage Drop: If the voltage quickly drops under load, the battery is likely deteriorating.\n\nShort Runtime: If the battery runs out of charge much faster than expected, it could mean it's near the end of its life.\n\nInconsistent Voltage Readings: Large fluctuations in voltage readings, especially when under load, can indicate a failing battery.\n\nPhysical Damage: Swelling, leaks, or any visible damage to the battery indicates that it needs to be replaced.\n\nBattery Maintenance Tips:\nRegular Charging: Avoid deep discharges and always keep the battery charged.\n\nEnvironmental Conditions: Keep the battery in a cool, dry place to avoid overheating or damage due to extreme temperatures.\n\nPeriodic Tests: Test the battery every 3-6 months to assess its health and ensure it’s functioning properly.\n\nUse the Right Charger: Always use the manufacturer's recommended charger to prevent overcharging or undercharging.\n\nConclusion:\nBattery testing is critical for ensuring that your Powerstack battery continues to perform optimally. Regular testing helps in identifying potential problems early and maintaining the battery’s health. Always follow the manufacturer’s instructions and consult with a professional if you're unsure about the testing process.", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 248, "imageuri": "https://bizimages.withfloats.com/actual/7f2c78a976e246efbe70882f742a421a.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/f8db1555dfa447dbb73d3446e6b45940.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2025-03-22T05:34:17.551Z", "updatedon": "0001-01-01T00:00:00Z", "buyonlinelink": null, "producturl": "https://LOCATIONS.UNIVERSALPOWER.CO.IN/BHIWADI/products/powerstack-battery-testing-/248", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": null, "category": "Powerstack battery Testing ", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": null, "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "67d52d8a4507f670f3d4fa58", "fptag": "UNIVERSALPOWERSYSTEMF82C", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Emerson 3-Phase Ups In Manesar", "description": "Emerson 3-Phase UPS (Uninterruptible Power Supply) systems are high-quality, reliable power backup solutions typically used in industrial, commercial, and critical infrastructure applications. These systems are designed to provide uninterrupted power to sensitive equipment, preventing downtime due to power interruptions, voltage fluctuations, or other electrical issues.\n\nKey Features of Emerson 3-Phase UPS:\nPower Capacity:\n\n3-Phase UPS systems come in a wide range of power capacities, generally from 10 kVA to 800 kVA or even higher, depending on the model.\nSuitable for medium to large-scale facilities like data centers, hospitals, manufacturing plants, and office buildings.\nTechnology:\n\nDouble Conversion Online Technology: Emerson’s 3-phase UPS systems typically use online double conversion technology, meaning that the inverter constantly supplies clean, regulated power to the load while the battery is charging.\nEfficiency: High-efficiency models (up to 96% or more) reduce energy consumption and operating costs.\nBattery Management: Integrated advanced battery management for monitoring health, charge, and backup times.\nHigh Availability:\n\nDesigned to provide reliable power for mission-critical applications.\nHot Swappable Batteries: In some models, batteries can be replaced without shutting down the UPS, ensuring uninterrupted power supply.\nScalability: Many models allow for modular expansion, meaning you can add additional capacity as needed.\nInput/Output Voltage:\n\nInput Voltage: Common input voltages are 380V, 400V, and 415V (3-phase).\nOutput Voltage: Typically 208V, 220V, 230V, or 400V for 3-phase systems, depending on the regional power grid standards.\nPower Factor: Emerson UPS systems usually have a high power factor of 0.9 or higher, improving efficiency.\nAdvanced Features:\n\nLCD/LED Display: Provides real-time data on UPS status, battery health, load levels, and alarms for easy monitoring.\nRemote Monitoring: Allows remote access for monitoring via web or SNMP (Simple Network Management Protocol) for real-time alerts and diagnostics.\nBypass Capability: If maintenance is required or the UPS is malfunctioning, the system can transfer to bypass mode to avoid downtime.\nDesign and Durability:\n\nCompact Design: Many models are designed to be space-efficient without compromising on power or cooling needs.\nRack-Mountable or Tower Formats: Depending on the installation space, Emerson offers both tower-style and rack-mounted designs.\nThermal Management: These UPS systems typically include advanced cooling systems to maintain efficient operation and prevent overheating.\nApplications:\n\nData Centers: Ensures uptime for servers and networking equipment.\nIndustrial Equipment: Protects critical machinery and automated systems from power failures.\nTelecommunications: Keeps communication systems running without interruption.\nHospitals: Supports life-saving equipment and systems that require constant power.\nCommercial Buildings: Ensures backup power for office systems and equipment.\nMaintenance and Service:\n\nSmart Battery Testing: Advanced systems monitor the health of batteries and alert users when maintenance or replacement is required.\nServiceable Parts: Emerson provides comprehensive support and service contracts to ensure your UPS remains in optimal condition.\nProactive Monitoring: With remote monitoring and diagnostic tools, faults can be detected before they impact operations.\nPopular Models:\nEmerson (now part of Vertiv) offers various UPS models under different series, such as:\n\nVertiv Liebert® ITA2: A high-efficiency 3-phase UPS solution for small to medium-sized applications.\nVertiv Liebert® EXL S1: A modular UPS system that offers scalability and high availability.\nVertiv Liebert® NXL: A large capacity 3-phase UPS designed for data centers and industrial applications.\nAdvantages of Emerson 3-Phase UPS:\nHigh Reliability: Ensures critical equipment remains powered during power failures or fluctuations.\nAdvanced Technology: Features like online double conversion, modular design, and remote monitoring provide superior performance and flexibility.\nEnergy Efficiency: Many Emerson UPS systems are highly efficient, reducing operating costs and environmental impact.\nScalability: As your power requirements grow, Emerson's modular systems can easily expand to meet increased demand.\n\nConclusion:\nEmerson 3-Phase UPS systems are excellent solutions for businesses and facilities that require high uptime and reliability. With their advanced features, efficient energy use, and robust design, they provide essential power protection for critical infrastructure. Whether you're in need of a UPS for a small office or a large data center, Emerson offers scalable and reliable power backup systems that ensure uninterrupted operation.", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "800 kva", "10 kva", "models batteries", "equipment maintenance", "small office", "380v 400v", "largescale facilities", "ups models", "excellent solutions", "easily expand", "data centers", "remote monitoring", "service contracts", "comprehensive support", "alert users", "realtime alerts", "remote access", "realtime data", "model suitable", "wide range", "ups remains", "office systems", "automated systems", "offers scalability", "vertiv offers", "bypass mode", "industrial commercial", "robust design", "higher depending", "critical infrastructure", "power failures", "monitoring health charge", "modular ups system", "advanced cooling systems", "emerson ups systems", "ups systems typically", "ensure uninterrupted operation", "3phase systems depending", "critical infrastructure applications", "power failures telecommunications", "emerson 3phase ups", "communication systems running", "environmental impact scalability", "industrial applications advantages", "vertiv liebert ita2", "diagnostics bypass capability", "high power factor", "provide reliable power", "power capacities generally", "provide uninterrupted power", "tower formats depending", "durability compact design", "avoid downtime design", "require high uptime", "flexibility energy efficiency", "diagnostic tools faults", "maintain efficient operation", "add additional capacity", "modular expansion meaning", "reduce energy consumption" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 229, "imageuri": "https://bizimages.withfloats.com/actual/187708a304fa44f1b41acc0e625a7a30.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/187708a304fa44f1b41acc0e625a7a30.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2025-03-15T07:34:34.549Z", "updatedon": "0001-01-01T00:00:00Z", "buyonlinelink": null, "producturl": "https://LOCATIONS.UNIVERSALPOWER.CO.IN/BHIWADI/products/emerson-3-phase-ups-in-manesar/229", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": null, "category": "Emerson 3-Phase Ups In Manesar", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": null, "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "672b169c155daa1d35aaea95", "fptag": "UNIVERSALPOWERSYSTEMF82C", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "VERTIV 20KVA UPS IN GURGAON", "description": "The Vertiv Liebert GXT5-20KMVRT11UXLN is a 20kVA (20000VA) rack/tower UPS from the Liebert GXT5 series. The GXT5 series provides high-performance, reliable power protection for critical equipment in IT environments such as data centers, server rooms, and telecommunications. The Liebert GXT5-20KMVRT11UXLN model is specifically designed to deliver high availability, efficient energy management, and flexible configurations (tower or rackmount).\nHere\\'s a detailed breakdown of the Vertiv Liebert GXT5-20KMVRT11UXLN UPS:\n\nKey Features of the Vertiv Liebert GXT5-20KMVRT11UXLN:\n\n1. Power Rating and Capacity:\nPower Rating: 20kVA / 20000VA\nOutput Power: 16000W (16kW) at 208V (depending on load conditions)\nThis provides robust protection for high-density IT loads, such as servers, network switches, telecom systems, and critical infrastructure.\n\n2. Voltage Configuration:\nInput Voltage: 208V (for 3-phase input)\nThe GXT5 can also be configured to operate at 120V AC (single-phase) when needed, making it flexible for different types of equipment and power requirements.\n\n3. Topology:\nOn-Line Double-Conversion:\nThe GXT5 series uses double-conversion (On-Line) topology, providing the highest level of protection.\nThis topology ensures that the UPS continuously filters and conditions the input power and provides a pure sinewave output to sensitive loads, completely isolating the load from power disturbances.\nZero transfer time from utility power to battery power ensures no downtime for connected equipment.\n\n4. Waveform Type:\nPure Sinewave Output:\nThe UPS produces a clean, pure sinewave output which is essential for powering sensitive IT equipment without distortion or interference.\n\n5. Battery Type and Runtime:\nBattery Type: Typically uses Sealed Lead-Acid (SLA) or VRLA (Valve-Regulated Lead-Acid) batteries, which require little maintenance and are commonly used in high-performance UPS systems.\nExternal Battery Support:\nThe Liebert GXT5-20KMVRT11UXLN supports external battery packs (available separately) to extend runtime for longer periods, making it ideal for power-hungry or mission-critical applications.\nCharging Time: Typically, it takes about 4-6 hours to recharge the batteries to 90% capacity.\n\n6. Runtime (Backup Time):\nThe battery backup time will vary depending on the load. Here are some estimates:\nAt 50% load (10kVA/10000W): Backup time could range between 15 to 25 minutes.\nAt full load (20kVA/16000W): Backup time would be much shorter, around 5-10 minutes depending on configuration and battery capacity.\nExtended runtime can be achieved with additional external battery cabinets.\n\n7. Cooling:\nFan-assisted cooling ensures optimal temperature management during operation. The UPS is designed to operate efficiently even in environments with higher ambient temperatures.\n\n8. Form Factor:\nRackmount and Tower:\nThe Liebert GXT5-20KMVRT11UXLN offers a flexible design, enabling it to be deployed as either a tower or a rackmount UPS.\nRackmount form factor: 3U (for the rack version), designed for 19-inch rack installations.\nThe rackmount option allows easy integration into standard server racks or data center environments.\n\n9. Energy Efficiency and Certifications:\nEnergy Star Certification:\nThe Liebert GXT5 is Energy Star certified, meaning it meets high-efficiency standards and minimizes energy consumption during operation.\nIt also has low total cost of ownership (TCO), thanks to its energy-efficient operation.\nHigh Efficiency Mode (Eco Mode):\nThe UPS features an eco mode for high-efficiency operation during normal conditions, further reducing energy consumption when conditions permit.\n\n10. Interfaces and Monitoring:\nLCD Display:\nThe UPS comes with an LCD display that provides real-time information on key parameters such as input/output voltage, battery charge, load levels, and alarm status.\n\nConnectivity:\nUSB, Serial, and Network Ports: The GXT5-20KMVRT11UXLN has USB and serial communication ports for local management and monitoring.\nSNMP Slot: It comes with an optional SNMP card for remote monitoring, allowing you to manage the UPS from anywhere on the network.\nDry Contact Interface: Available for integration with building management or alert systems.\n\n11. Advanced Features:\nAutomatic Transfer Switch (ATS): The Liebert GXT5 can support an optional ATS for automatic switching between the utility power and the UPS in the event of a failure, ensuring seamless power continuity.\n\nOverload and Short-Circuit Protection:\n\nProtects the UPS and connected loads in case of an overload or short circuit by gracefully shutting down the system or providing alarms.\nSmart Battery Management:\n\nThe system features battery monitoring to optimize charging cycles and extend the life of the battery bank. Battery health diagnostics help predict and prevent potential failures.\nAudible Alarms:\n\nProvides alerts for low battery, overload, power failure, and other system faults, ensuring that you’re always aware of the UPS condition.", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "120V AC", "The UPS", "50% load", "Eco Mode", "full load", "4-6 hours", "SNMP Slot", "load levels", "LCD Display", "input power", "90% capacity", "optional ATS", "alarm status", "5-10 minutes", "Key Features", "Power Rating", "rack version", "server rooms", "data centers", "battery bank", "Battery Type", "power failure", "rackmount UPS", "short circuit", "Waveform Type", "highest level", "3-phase input", "Input Voltage", "UPS condition", "Network Ports", "alert systems", "Charging Time", "utility power", "battery power", "Line) topology", "Audible Alarms", "key parameters", "longer periods", "battery charge", "low total cost", "load conditions", "charging cycles", "flexible design", "different types", "telecom systems", "sensitive loads", "IT environments", "The GXT5 series", "Extended runtime", "easy integration", "network switches", "rackmount option", "battery capacity", "15 to 25 minutes", "Sealed Lead-Acid", "local management", "VERTIV 20KVA UPS", "remote monitoring", "normal conditions", "Advanced Features", "robust protection", "high availability", "Energy Efficiency", "potential failures", "little maintenance", "detailed breakdown", "critical equipment", "battery monitoring", "energy consumption", "power disturbances", "power requirements", "optional SNMP card", "Zero transfer time", "connected equipment", "automatic switching", "building management", "battery backup time", "other system faults", "Liebert GXT5 series", "Fan-assisted cooling", "input/output voltage", "High Efficiency Mode", "20000VA Output Power", "Voltage Configuration", "real-time information", "Rackmount form factor", "low battery, overload", "high-density IT loads", "standard server racks", "Dry Contact Interface", "Line Double-Conversion", "The GXT5-20KMVRT11UXLN", "sensitive IT equipment", "external battery packs", "critical infrastructure", "flexible configurations", "Short-Circuit Protection", "data center environments", "Smart Battery Management", "External Battery Support", "high-efficiency operation", "high-efficiency standards", "Energy Star Certification", "seamless power continuity", "Automatic Transfer Switch", "energy-efficient operation", "serial communication ports", "19-inch rack installations", "Battery health diagnostics", "efficient energy management", "higher ambient temperatures", "clean, pure sinewave output", "high-performance UPS systems", "mission-critical applications", "optimal temperature management", "20kVA (20000VA) rack/tower UPS", "Valve-Regulated Lead-Acid) batteries", "The Liebert GXT5-20KMVRT11UXLN model", "additional external battery cabinets", "Vertiv Liebert GXT5-20KMVRT11UXLN UPS", "The Vertiv Liebert GXT5-20KMVRT11UXLN", "high-performance, reliable power protection" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 163, "imageuri": "https://bizimages.withfloats.com/actual/86255b3534174e95852f2e98910612d7.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/86255b3534174e95852f2e98910612d7.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-11-06T07:11:24.367Z", "updatedon": "2024-11-06T07:11:24.367Z", "buyonlinelink": null, "producturl": "https://LOCATIONS.UNIVERSALPOWER.CO.IN/BHIWADI//vertiv-20kva-ups-in-gurgaon/163", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": null, "category": "20 KVA UPS", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "672b119afa30a93a44b20cf3", "fptag": "UNIVERSALPOWERSYSTEMF82C", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Vertiv 6kVA PowerBank UPS IN FARIDABAD", "description": "The Vertiv 6kVA PowerBank UPS is typically part of Vertiv's On-Line or Line-Interactive power protection solutions that integrate battery backup systems designed to maintain a continuous supply of power in the event of an outage. These UPS systems are ideal for applications where consistent power quality and uptime are critical, such as for medium to large businesses, IT infrastructure, and high-demand environments like data centers.\n\nAlthough \"PowerBank\" is a brand name or marketing term used by Vertiv for specific models of UPS systems (often focused on extended battery runtimes or integrated external batteries), detailed product specifications and the exact model can vary. Below is a general overview of the Vertiv 6kVA PowerBank UPS based on the series features typically associated with Vertiv's offerings.\n\nKey Features and Specifications:\n\n1. Topology:\nDouble Conversion On-Line: Provides the highest level of protection by continuously filtering and conditioning the incoming utility power. It delivers pure sinewave output, making it suitable for sensitive equipment that requires high-quality power.\nThe On-Line topology ensures zero transfer time in case of power failure because the UPS system is always supplying power from the inverter.\n\n2. Power Rating:\n6kVA / 6000VA (Provides backup for medium-sized systems or higher power applications like small-to-medium server rooms, network systems, and critical equipment).\n\n3. Output Power:\nOutput Power: 4.8 kW to 5.4 kW (depending on load and configuration)\n\n4. Input and Output Specifications:\nInput Voltage: 110V - 300V, wide input range for handling fluctuations without switching to battery mode.\nOutput Voltage: 230V ± 2% (standard in most countries)\n\n5. Waveform Type:\nPure Sinewave Output: Ensures that the connected equipment receives a smooth and continuous power supply without the distortions found in some lower-quality UPS systems.\n\n6. Battery Configuration:\nBattery Type: Typically Sealed Lead-Acid (SLA) or Valve-Regulated Lead-Acid (VRLA) batteries.\nBattery Capacity: Typically, 12V batteries with 18Ah, 24Ah, or higher capacities.\nThe system may include external battery modules (Battery Banks) for extended runtime, making it suitable for larger power demands and longer backup times.\nExternal Battery Packs: Some models support additional external battery cabinets, which allow the UPS to run longer during extended outages. This is especially important for environments where power failures may last for an extended period.\n\n7. Charging Time:\nTypically, the system will fully recharge in around 4-6 hours, depending on battery size and environmental conditions.\n\n8. Backup Time (Runtime):\nThe backup time can range from 20 minutes to several hours, depending on the load.\nFor example, a 50% load (about 3 kVA or 3000W) will generally offer a longer runtime.\nA full load of 6kVA will typically provide 10-15 minutes of backup time.\nIf the UPS is configured with external battery packs, the runtime can be extended for much longer periods, making it ideal for critical systems that require extended protection during power outages.\n\n9. Cooling System:\nThe UPS is equipped with fan-assisted cooling to ensure efficient heat dissipation and prevent overheating during extended use.\n\n10. Display and Monitoring:\nLCD Display: Displays real-time information about UPS status, battery health, load capacity, input/output voltages, battery runtime, and other important parameters.\nAudible Alarms: Alerts for conditions such as low battery, overload, power failure, and system faults.\nSmart Battery Management: Ensures optimal battery health and extends the lifespan of the UPS.\n\n11. Connectivity and Interfaces:\nUSB/Serial Ports: For communication with a connected computer or server for monitoring and management.\nSNMP Slots: Some models may offer SNMP (Simple Network Management Protocol) support for remote monitoring and management via networked devices.\nDry Contact Interface: Allows integration with building management or alert systems.\nOptional Software: Available for automated shutdown in the event of prolonged power outages, and event logging.\n\n12. Form Factor:\nTower or Rackmount (depending on the specific model and user preferences). Some models are available in rackmount configurations for server rooms and data centers, while others are more suitable for a tower setup.\n\n13. Additional Features:\nOverload Protection: Safeguards against exceeding the UPS's rated capacity.\nShort-Circuit Protection: Provides defense against electrical faults.\nAutomatic Voltage Regulation (AVR): Ensures that the UPS compensates for voltage fluctuations (e.g., brownouts or overvoltages) without resorting to battery backup.\n", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "3 kVA", "5.4 kW", "4.8 kW", "The UPS", "50% load", "full load", "4-6 hours", "medium to", "20 minutes", "SNMP Slots", "brand name", "UPS status", "tower setup", "LCD Display", "exact model", "low battery", "Key Features", "data centers", "extended use", "battery size", "Battery Type", "battery mode", "Output Power", "load capacity", "event logging", "10-15 minutes", "system faults", "several hours", "Waveform Type", "highest level", "Charging Time", "alert systems", "Input Voltage", "12V batteries", "power failure", "Battery Banks", "specific model", "Audible Alarms", "most countries", "marketing term", "longer runtime", "longer periods", "Output Voltage", "12. Form Factor", "series features", "extended period", "VRLA) batteries", "2. Power Rating", "network systems", "On-Line topology", "extended runtime", "user preferences", "USB/Serial Ports", "Sealed Lead-Acid", "general overview", "large businesses", "Battery Capacity", "critical systems", "extended outages", "wide input range", "remote monitoring", "9. Cooling System", "electrical faults", "Optional Software", "networked devices", "Double Conversion", "IT infrastructure", "higher capacities", "continuous supply", "automated shutdown", "connected computer", "critical equipment", "high-quality power", "zero transfer time", "Overload Protection", "connected equipment", "sensitive equipment", "building management", "extended protection", "Additional Features", "medium server rooms", "longer backup times", "voltage fluctuations", "fan-assisted cooling", "medium-sized systems", "pure sinewave output", "larger power demands", "real-time information", "Battery Configuration", "Output Specifications", "Dry Contact Interface", "battery backup systems", "optimal battery health", "incoming utility power", "External Battery Packs", "continuous power supply", "prolonged power outages", "rackmount configurations", "environmental conditions", "high-demand environments", "Short-Circuit Protection", "Smart Battery Management", "consistent power quality", "external battery modules", "Valve-Regulated Lead-Acid", "higher power applications", "lower-quality UPS systems", "extended battery runtimes", "other important parameters", "efficient heat dissipation", "Automatic Voltage Regulation", "integrated external batteries", "The Vertiv 6kVA PowerBank UPS", "detailed product specifications", "Simple Network Management Protocol", "additional external battery cabinets", "Line-Interactive power protection solutions" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 161, "imageuri": "https://bizimages.withfloats.com/actual/76ce7c6b4c744ba9b94ab60a79c3031e.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/76ce7c6b4c744ba9b94ab60a79c3031e.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-11-06T06:50:02.976Z", "updatedon": "2024-11-06T06:50:02.976Z", "buyonlinelink": null, "producturl": "https://LOCATIONS.UNIVERSALPOWER.CO.IN/BHIWADI/products/vertiv-6kva-powerbank-ups-in-faridabad/161", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": null, "category": "6 KVA POWERBANK", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "672b0f8b03587d9ecbd6ea6c", "fptag": "UNIVERSALPOWERSYSTEMF82C", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Vertiv 6kVA UPS IN BHIWADI", "description": "The Vertiv 6kVA UPS models are available in both the SB (Standby) and LB (Line-Interactive) series, as well as other more advanced series, such as the On-Line (Double Conversion) series, which are designed for higher power loads and more demanding applications. Below is a breakdown of the 6kVA UPS options from Vertiv, highlighting the SB, LB, and other potential variants, including their key features, specifications, and ideal use cases.\nVertiv 6kVA LB (Line-Interactive) Series UPS\n\nThe LB Series for 6kVA is more advanced than the SB Series, using a Line-Interactive topology that corrects voltage fluctuations without switching to battery power. This is ideal for environments where power stability is critical, and provides more reliable protection for sensitive equipment.\n\nKey Features:\nTopology: Line-Interactive\nPower Rating: 6kVA / 6000VA\nOutput Power: 4200W - 5400W (depending on model)\nInput Voltage: 140V - 300V (wider input range than SB series)\nOutput Voltage: 230V ± 10%\nWaveform Type: Simulated Sinewave (or Pure Sinewave, depending on model)\nBattery Type: Sealed Lead-Acid (SLA) or VRLA\nBattery Capacity: 12V, 18Ah, 24Ah, or higher (depending on model)\nCharging Time: 4-6 hours for full charge\nBackup Time (Runtime): 10-30 minutes depending on load (e.g., 50-70% load)\nCooling: Fan-assisted cooling for high-efficiency operation\nInterfaces: USB/Serial ports (with optional software for remote monitoring and automatic shutdown)\nForm Factor: Tower or Rackmount (depending on specific model)\nAdditional Features:\nAutomatic Voltage Regulation (AVR): Helps correct voltage fluctuations (e.g., brownouts or surges) without using battery power\nCold Start: Can be turned on without mains power (useful during power failures)\nLCD/LED Display (on some models): Real-time monitoring of UPS status, battery level, load capacity, etc.\nOverload, short-circuit, and low-battery protection\nSmart battery management to extend battery life and improve performance\nAudible alarms for low battery, overload, and fault events\nAdvanced monitoring and remote management (via optional software)\nIdeal Use Case:\nSmall-to-medium-sized servers, network equipment, and critical business infrastructure\nMedical equipment, point-of-sale (POS) systems, and sensitive electronics requiring stable power quality\nIT infrastructure in small businesses needing both battery backup and protection against power fluctuations\n\nVertiv 6kVA On-Line (Double Conversion) Series UPS\n\nThe On-Line (Double Conversion) series is the most robust and efficient series, providing true double-conversion power protection. This topology is designed to offer continuous clean and stable power to sensitive equipment, protecting it from all power disturbances including blackouts, brownouts, and voltage surges.\n\nKey Features:\nTopology: On-Line (Double Conversion)\nPower Rating: 6kVA / 6000VA\nOutput Power: 4800W - 5400W (depending on the model)\nInput Voltage: 110V - 300V (wide input range)\nOutput Voltage: 230V ± 2% (pure sinewave output)\nWaveform Type: Pure Sinewave\nBattery Type: Sealed Lead-Acid (SLA) or VRLA\nBattery Capacity: Typically 12V, 18Ah, or 24Ah, with external battery options for longer runtimes\nCharging Time: 4-6 hours for full charge\nBackup Time (Runtime): 20-40 minutes depending on load (e.g., 50-60% load)\nCooling: Advanced fan-assisted cooling with efficient heat dissipation\nInterfaces: USB/Serial ports, RS-232, SNMP for remote monitoring and management\nForm Factor: Tower or Rackmount\nAdditional Features:\nDouble Conversion: Provides continuous, clean power from the UPS’s inverter, ensuring zero transfer time during power disturbances\nHigh Efficiency Mode: Switches to energy-efficient operation during stable power conditions while ensuring seamless transition to double conversion during power failure\nLCD/LED Display: Provides real-time status of the UPS, battery health, load capacity, etc.\nRemote Monitoring: Integrated SNMP or optional software for proactive monitoring and automated shutdown\nOverload and short-circuit protection\nExtended Battery Options: External battery packs for longer runtime in high-demand applications", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "SB Series", "4-6 hours", "Cold Start", "UPS status", "50-60% load", "50-70% load", "low battery", "mains power", "POS) systems", "fault events", "key features", "battery life", "load capacity", "20-40 minutes", "10-30 minutes", "battery level", "Waveform Type", "Input Voltage", "battery power", "The LB Series", "specific model", "voltage surges", "Audible alarms", "battery health", "power failures", "Output Voltage", "battery backup", "Vertiv 6kVA LB", "Integrated SNMP", "LCD/LED Display", "power stability", "advanced series", "ideal use cases", "real-time status", "small businesses", "USB/Serial ports", "Sealed Lead-Acid", "Battery Capacity", "continuous clean", "efficient series", "6kVA UPS options", "wide input range", "Medical equipment", "network equipment", "remote monitoring", "optional software", "IT infrastructure", "remote management", "wider input range", "automated shutdown", "power disturbances", "power fluctuations", "automatic shutdown", "Simulated Sinewave", "higher power loads", "zero transfer time", "seamless transition", "Additional Features", "sensitive equipment", "reliable protection", "Advanced monitoring", "6000VA Output Power", "proactive monitoring", "medium-sized servers", "Real-time monitoring", "voltage fluctuations", "stable power quality", "pure sinewave output", "High Efficiency Mode", "sensitive electronics", "demanding applications", "low-battery protection", "management Form Factor", "External battery packs", "continuous, clean power", "stable power conditions", "full charge Backup Time", "short-circuit protection", "high-demand applications", "other potential variants", "Smart battery management", "Extended Battery Options", "external battery options", "Line-Interactive topology", "Double Conversion) series", "energy-efficient operation", "Pure Sinewave Battery Type", "The Vertiv 6kVA UPS models", "Line-Interactive) Series UPS", "Automatic Voltage Regulation", "Advanced fan-assisted cooling", "Line-Interactive Power Rating", "longer runtimes Charging Time", "critical business infrastructure", "high-efficiency operation Interfaces", "efficient heat dissipation Interfaces", "true double-conversion power protection" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 160, "imageuri": "https://bizimages.withfloats.com/actual/578b79886fa542a88c0b7e3b5d276b57.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/578b79886fa542a88c0b7e3b5d276b57.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-11-06T06:41:15.802Z", "updatedon": "2024-11-06T06:41:15.802Z", "buyonlinelink": null, "producturl": "https://LOCATIONS.UNIVERSALPOWER.CO.IN/BHIWADI/products/vertiv-6kva-ups-in-bhiwadi/160", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": null, "category": "6 KVA UPS", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "67209b428e2d6f6077e24df5", "fptag": "UNIVERSALPOWERSYSTEMF82C", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Vertiv Online Ups In Sonipat", "description": "Vertiv offers a range of online UPS (Uninterruptible Power Supply) systems designed to provide reliable power protection for critical applications, including data centers, telecommunications, and industrial environments. Here’s a detailed overview of Vertiv's online UPS solutions, including key features, specifications, benefits, and maintenance practices.\n\nVertiv Online UPS Overview\nPurpose:\n\nOnline UPS systems are designed to ensure continuous and clean power supply by converting incoming AC power to DC and then back to AC. This process provides maximum protection against power disturbances such as surges, sags, and outages.\nKey Features\nContinuous Power Supply:\n\nProvides uninterrupted power during outages, ensuring that sensitive equipment remains operational.\nDouble-Conversion Technology:\n\nConverts incoming AC to DC and back to AC, delivering stable and high-quality power output.\nHigh Efficiency:\n\nMany models boast efficiencies of 95% or higher, particularly in eco-mode, reducing energy costs.\nScalability:\n\nOptions for parallel operation allow for easy scaling of capacity by adding additional units.\nAdvanced Battery Management:\n\nFeatures for monitoring battery health, optimizing performance, and extending battery life, including temperature and state of charge monitoring.\nUser-Friendly Interface:\n\nLCD or LED displays provide real-time data on power status, battery health, and load levels.\nNetwork Management Capabilities:\n\nIntegration with remote monitoring systems through SNMP, allowing for proactive management and alerts.\nVibration and Shock Resistance:\n\nDesigned to withstand harsh operating conditions, making them suitable for industrial environments.\nFlexible Input/Output Options:\n\nSupports various voltages and phases, accommodating different application requirements.\nSpecifications (Typical)\nInput Voltage: 380/400/415 V (three-phase), with some models supporting single-phase.\nOutput Voltage: 380/400/415 V (three-phase).\nOutput Frequency: 50/60 Hz (auto-sensing).\nCapacity Range: Varies widely, from small systems (1 kVA) to large systems (up to 500 kVA or more).\nEfficiency: Typically 95% to 98%, depending on model and operating conditions.\nForm Factor: Available in tower or rack-mounted configurations.\nBenefits\nReliability:\n\nProvides a stable power supply, protecting sensitive equipment from power disturbances.\nImproved Power Quality:\n\nFilters out electrical noise and provides clean power, which is crucial for IT and telecommunications equipment.\nCost Savings:\n\nHigh efficiency reduces operational costs, and predictive maintenance can prevent costly downtime.\nRobust Performance:\n\nDesigned for heavy loads and capable of maintaining performance under varying conditions.\nRemote Monitoring:\n\nEnables proactive management and quick response to potential issues, enhancing system reliability.\nMaintenance and Support\nRegular Inspections:\n\nSchedule periodic checks to assess the condition of the UPS and batteries.\nPreventive Maintenance:\n\nIncludes cleaning, tightening connections, and replacing worn-out components as necessary.\nBattery Management:\n\nMonitor battery health, conduct load tests, and replace batteries according to manufacturer guidelines.\nDocumentation:\n\nMaintain records of inspections, tests, and repairs to track system performance over time.\nProfessional Support:\n\nEngage professional services for emergency repairs, technical support, and routine maintenance.\nConclusion\nVertiv's online UPS systems provide critical power protection for a variety of applications. With their advanced features, high efficiency, and robust design, they are ideal for ensuring reliable power in environments where uptime is essential. Proper maintenance and proactive management are key to maximizing performance and longevity.\n\nIf you need more specific information about particular models, configurations, or any other aspect, feel free to ask!", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "50/60 Hz", "load tests", "Many models", "heavy loads", "Form Factor", "load levels", "key features", "other aspect", "Cost Savings", "LED displays", "battery life", "easy scaling", "energy costs", "data centers", "power status", "robust design", "Input Voltage", "large systems", "small systems", "Capacity Range", "battery health", "quick response", "real-time data", "Output Voltage", "High Efficiency", "periodic checks", "costly downtime", "potential issues", "electrical noise", "various voltages", "Shock Resistance", "additional units", "Output Frequency", "emergency repairs", "particular models", "technical support", "operational costs", "advanced features", "charge monitoring", "detailed overview", "incoming AC power", "system performance", "Robust Performance", "system reliability", "Proper maintenance", "parallel operation", "varying conditions", "power disturbances", "maximum protection", "clean power supply", "Online UPS systems", "Regular Inspections", "routine maintenance", "worn-out components", "sensitive equipment", "uninterrupted power", "stable power supply", "Professional Support", "specific information", "proactive management", "online UPS solutions", "maintenance practices", "professional services", "critical applications", "Preventive Maintenance", "predictive maintenance", "Improved Power Quality", "industrial environments", "manufacturer guidelines", "User-Friendly Interface", "Continuous Power Supply", "remote monitoring systems", "critical power protection", "reliable power protection", "high-quality power output", "harsh operating conditions", "Vertiv Online UPS Overview", "rack-mounted configurations", "Advanced Battery Management", "telecommunications equipment", "Double-Conversion Technology", "Flexible Input/Output Options", "Network Management Capabilities", "different application requirements", "Uninterruptible Power Supply) systems" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 133, "imageuri": "https://bizimages.withfloats.com/actual/921524a63cba4e7eb11b3d4471525eef.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/921524a63cba4e7eb11b3d4471525eef.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-10-29T08:22:26.236Z", "updatedon": "2024-10-29T08:22:26.236Z", "buyonlinelink": null, "producturl": "https://LOCATIONS.UNIVERSALPOWER.CO.IN/BHIWADI/products/vertiv-online-ups-in-sonipat/133", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": null, "category": "Vertiv Online Ups", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "672099270457387ecde3daab", "fptag": "UNIVERSALPOWERSYSTEMF82C", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": " Vertiv 500 kva Ups In Manesar", "description": "The Vertiv 500 kVA UPS (Uninterruptible Power Supply) is a high-capacity power protection solution designed for industrial applications, data centers, and critical infrastructure. Here’s a detailed overview of its features, specifications, benefits, and maintenance practices.\n\nVertiv 500 kVA UPS Overview\nKey Features\nHigh Power Capacity:\n\nProvides 500 kVA of power, suitable for large-scale applications requiring substantial backup power.\nTopologies:\n\nOnline Double-Conversion: This design ensures continuous, clean, and stable power by converting incoming AC to DC and then back to AC, offering maximum protection against power disturbances.\nHigh Efficiency:\n\nTypically achieves efficiencies of 95% or higher, reducing energy consumption and operational costs.\nScalability:\n\nSupports parallel operation with multiple units for increased redundancy and power capacity as your needs grow.\nAdvanced Battery Management:\n\nFeatures for optimizing battery performance, including temperature monitoring, state of charge, and predictive diagnostics.\nUser-Friendly Interface:\n\nLCD or LED displays provide real-time monitoring of power status, battery health, and load levels.\nNetwork Management Capabilities:\n\nIntegration with network management systems for remote monitoring and control, often through SNMP or web interfaces.\nVibration and Shock Resistance:\n\nDesigned to withstand industrial environments, making it reliable for mission-critical applications.\nMultiple Input/Output Options:\n\nFlexible configurations to match various voltage and phase requirements.\nSpecifications (Typical)\nInput Voltage: 380/400/415 V (Three-phase)\nOutput Voltage: 380/400/415 V (Three-phase)\nOutput Frequency: 50/60 Hz (auto-sensing)\nEfficiency: Up to 98% in eco mode.\nDimensions: Varies by model; typically designed for rack or floor mounting.\nWeight: Can exceed 1000 kg, depending on configuration and battery type.\nBattery Types: Can support various battery technologies, including lead-acid and lithium-ion.\nBenefits\nReliability:\n\nEnsures uninterrupted power supply and protects critical loads from power disturbances.\nCost Savings:\n\nHigh efficiency leads to lower energy costs, while predictive maintenance helps avoid expensive downtimes.\nEnhanced Performance:\n\nMaintains stable output voltage and frequency, protecting sensitive equipment.\nProactive Monitoring:\n\nRemote monitoring capabilities allow for early detection of potential issues, improving uptime and reliability.\nRobust Design:\n\nBuilt to withstand harsh industrial conditions, ensuring longevity and performance.\nMaintenance and Support\nRegular Inspections:\n\nSchedule periodic checks to assess the condition of the UPS and batteries.\nPreventive Maintenance:\n\nCleaning, tightening connections, and replacing worn-out parts as needed.\nBattery Management:\n\nMonitor battery health, perform load tests, and replace batteries according to manufacturer guidelines.\nDocumentation:\n\nKeep detailed records of maintenance, inspections, and performance metrics.\nEmergency Support:\n\nEngage professional services for emergency repairs and technical support when needed.\nConclusion\nThe Vertiv 500 kVA UPS is a robust solution designed for high-demand environments, ensuring reliable power protection for critical applications. With its advanced features and capabilities, it is ideal for data centers, industrial applications, and other mission-critical settings. Proper maintenance and proactive management can further enhance its performance and longevity.\n\nIf you have specific questions or need additional details, feel free to ask!", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "1000 kg", "eco mode", "50/60 Hz", "out parts", "load tests", "incoming AC", "load levels", "Key Features", "Cost Savings", "LED displays", "data centers", "battery type", "power status", "stable power", "Robust Design", "Input Voltage", "battery health", "critical loads", "floor mounting", "web interfaces", "multiple units", "periodic checks", "early detection", "High Efficiency", "various voltage", "robust solution", "Output Frequency", "detailed records", "potential issues", "Shock Resistance", "technical support", "Emergency Support", "advanced features", "emergency repairs", "operational costs", "detailed overview", "Proper maintenance", "additional details", "specific questions", "phase requirements", "parallel operation", "energy consumption", "power disturbances", "maximum protection", "lower energy costs", "Regular Inspections", "performance metrics", "battery performance", "sensitive equipment", "expensive downtimes", "High Power Capacity", "Enhanced Performance", "Proactive Monitoring", "real-time monitoring", "proactive management", "maintenance practices", "professional services", "stable output voltage", "Preventive Maintenance", "predictive maintenance", "predictive diagnostics", "temperature monitoring", "The Vertiv 500 kVA UPS", "manufacturer guidelines", "Flexible configurations", "User-Friendly Interface", "critical infrastructure", "industrial environments", "industrial applications", "high-demand environments", "Online Double-Conversion", "large-scale applications", "substantial backup power", "reliable power protection", "uninterrupted power supply", "network management systems", "Advanced Battery Management", "harsh industrial conditions", "Vertiv 500 kVA UPS Overview", "various battery technologies", "Uninterruptible Power Supply", "mission-critical applications", "Multiple Input/Output Options", "Remote monitoring capabilities", "Network Management Capabilities", "other mission-critical settings", "high-capacity power protection solution" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 132, "imageuri": "https://bizimages.withfloats.com/actual/a1fa53c29ff94e7cbe9bf48898ab6a39.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/a1fa53c29ff94e7cbe9bf48898ab6a39.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-10-29T08:13:27.64Z", "updatedon": "2024-10-29T08:13:27.64Z", "buyonlinelink": null, "producturl": "https://LOCATIONS.UNIVERSALPOWER.CO.IN/BHIWADI/products/-vertiv-500-kva-ups-in-manesar/132", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": null, "category": " Vertiv 500 kva Ups", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "6720980b2b5881cbadcda4e8", "fptag": "UNIVERSALPOWERSYSTEMF82C", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Repairing And Maintaining UPS In Delhi", "description": "Repairing And Maintaining UPS (Uninterruptible Power Supply) batteries is crucial for ensuring the reliability and longevity of the power backup system. Here’s a detailed overview of UPS battery maintenance and repair practices.\n\nUPS Battery Types\nLead-Acid Batteries:\n\nValve-Regulated Lead Acid (VRLA): Maintenance-free and sealed, suitable for most UPS systems.\nFlooded Lead Acid: Requires periodic maintenance and water topping.\nLithium-Ion Batteries:\n\nIncreasingly used due to longer life and higher efficiency but may require specific handling protocols.\nMaintenance Practices\nRegular Inspections:\n\nVisual Check: Inspect batteries for physical damage, corrosion, or leaks. Look for swelling or bulging in case of lead-acid batteries.\nConnections: Ensure all terminals and connections are tight and free of corrosion.\nCleaning:\n\nClean battery terminals with a mixture of baking soda and water to remove corrosion. Rinse with clean water and dry thoroughly.\nBattery Testing:\n\nVoltage Checks: Regularly measure the voltage of each battery to identify weak cells.\nLoad Testing: Perform load tests to ensure the battery can deliver the expected capacity under load conditions.\nTemperature Monitoring:\n\nMonitor battery temperature, especially in environments with high heat, as excessive temperatures can affect battery performance and lifespan.\nElectrolyte Level (for Flooded Batteries):\n\nCheck and maintain the electrolyte levels in flooded lead-acid batteries. Top up with distilled water as necessary.\nBattery Health Monitoring:\n\nUse battery management systems (BMS) for advanced monitoring of battery health, state of charge, and state of health.\nRepair Practices\nIdentifying Faults:\n\nCommon issues include short-circuited cells, sulfation, and capacity loss. Use diagnostic tools to identify problems.\nReplacing Individual Batteries:\n\nIf a battery within a pack fails, replace only the faulty battery if it’s compatible. However, it's often recommended to replace all batteries in a series to ensure uniform performance.\nEqualization Charging (for Flooded Batteries):\n\nPeriodically perform equalization charging to balance the charge across all cells and prevent sulfation.\nReconditioning:\n\nSome lead-acid batteries can be reconditioned through a process of controlled charging and discharging to restore capacity. This is not always successful and should be done by professionals.\nBattery Replacement:\n\nWhen batteries reach the end of their lifespan (typically 3-5 years for lead-acid), replace them with new ones. Ensure that replacements meet the manufacturer's specifications.\nBest Practices for Maintenance\nDocumentation:\n\nKeep records of inspections, tests, and replacements to track battery performance over time.\nEnvironmental Conditions:\n\nMaintain an optimal environment for batteries—ideally, a cool, dry place free from excessive humidity and temperature fluctuations.\nProfessional Servicing:\n\nConsider engaging professionals for complex repairs or maintenance tasks, especially for large or critical UPS systems.\nTraining:\n\nTrain personnel on proper handling, maintenance, and safety procedures related to UPS batteries.\nConclusion\nRegular maintenance and timely repairs of UPS batteries are essential for ensuring the reliability of power backup systems. By implementing best practices, monitoring battery health, and addressing issues promptly, you can prolong the life of your UPS batteries and enhance overall system performance. If you have specific questions or need further details on any aspect, feel free to ask!", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "3-5 years", "high heat", "load tests", "weak cells", "longer life", "baking soda", "clean water", "Load Testing", "Visual Check", "Common issues", "capacity loss", "water topping", "UPS batteries", "Voltage Checks", "timely repairs", "Best Practices", "faulty battery", "Delhi Repairing", "distilled water", "complex repairs", "load conditions", "physical damage", "Battery Testing", "Maintaining UPS", "cool, dry place", "diagnostic tools", "repair practices", "most UPS systems", "expected capacity", "safety procedures", "maintenance tasks", "Electrolyte Level", "higher efficiency", "detailed overview", "Flooded Batteries", "UPS Battery Types", "Flooded Lead Acid", "excessive humidity", "specific questions", "Lead-Acid Batteries", "Regular Inspections", "Regular maintenance", "optimal environment", "Battery Replacement", "battery temperature", "uniform performance", "advanced monitoring", "battery performance", "power backup system", "Individual Batteries", "periodic maintenance", "critical UPS systems", "Equalization Charging", "short-circuited cells", "Lithium-Ion Batteries", "Maintenance Practices", "Professional Servicing", "excessive temperatures", "Temperature Monitoring", "UPS battery maintenance", "Clean battery terminals", "temperature fluctuations", "Environmental Conditions", "Maintenance Documentation", "Battery Health Monitoring", "Valve-Regulated Lead Acid", "battery management systems", "overall system performance", "specific handling protocols", "Uninterruptible Power Supply" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 131, "imageuri": "https://bizimages.withfloats.com/actual/1c0f13c6e9d34936ad199dbe084446a5.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/1c0f13c6e9d34936ad199dbe084446a5.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-10-29T08:08:43.949Z", "updatedon": "2024-10-29T08:08:43.949Z", "buyonlinelink": null, "producturl": "https://LOCATIONS.UNIVERSALPOWER.CO.IN/BHIWADI/products/repairing-and-maintaining-ups-in-delhi/131", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": null, "category": "Repairing And Maintaining UPS", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "670d1299ca3ff01b3d6e0ef2", "fptag": "UNIVERSALPOWERSYSTEMF82C", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Vertiv 1000 kVA UPS IN KIRTI NAGAR DELHI", "description": "overview of the Vertiv 1000 kVA UPS, focusing on its features, specifications, and applications.\n\nGeneral Overview\nType: Online UPS (Double-Conversion)\nCapacity: 1000 kVA (1 MVA)\nForm Factor: Typically floor-mounted, designed for large facilities.\nElectrical Specifications\nInput Voltage: Usually 380V to 480V AC, three-phase\nOutput Voltage: Configurable output, typically 380V to 480V AC\nFrequency: 50/60 Hz (auto-sensing)\nOutput Power Factor: Typically around 0.9 to 1.0\nPerformance\nEfficiency: High efficiency, often exceeding 95%, with options for eco-mode to enhance energy savings.\nTransfer Time: Zero milliseconds due to the online architecture, ensuring uninterrupted power supply.\nBattery and Runtime\nBattery Type: Commonly uses sealed lead-acid (SLA) or lithium-ion batteries.\nBattery Backup Time: Varies based on load; external battery cabinets can extend runtime.\nRecharge Time: Typically 4-8 hours to recharge from complete discharge.\nFeatures\nUser Interface: LCD display with real-time monitoring of operational status, battery health, load levels, and alarms.\nCommunication Ports: SNMP, USB, and RS-232 for monitoring and remote management.\nSurge Protection: Built-in surge protection to safeguard connected equipment.\nOverload Protection: Automatic shutdown in case of overload conditions.\nPhysical Specifications\nDimensions: Size varies by model; requires substantial floor space and proper ventilation.\nWeight: Generally heavy; ensure appropriate installation support.\nInstallation and Management\nMounting Options: Designed for floor mounting; requires sufficient space and infrastructure.\nManagement Software: Advanced software options for monitoring and managing UPS status remotely.\nApplications\nIdeal for:\nData centers\nLarge IT infrastructures\nIndustrial applications\nTelecommunications\nHealthcare facilities\nAdditional Features\nModularity: Some models may offer modular designs for scalability and redundancy.\nHot-Swap Capability: Allows battery replacement and maintenance without downtime.\nParallel Operation: Supports parallel configurations for redundancy and capacity scaling.\nWarranty and Support\nWarranty: Generally includes a limited warranty covering parts and labor, with options for extended service agreements.\nSupport: Vertiv offers various support services, including installation, maintenance, and monitoring solutions.\nConclusion\nThe Vertiv 1000 kVA UPS is designed for mission-critical applications requiring high reliability and performance. It is well-suited for environments where power continuity is essential.", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "50/60 Hz", "4-8 hours", "UPS status", "Online UPS", "load levels", "LCD display", "Form Factor", "Data centers", "Recharge Time", "Transfer Time", "energy savings", "battery health", "floor mounting", "modular designs", "High efficiency", "capacity scaling", "limited warranty", "Support Warranty", "high reliability", "Surge Protection", "sealed lead-acid", "sufficient space", "power continuity", "large facilities", "Zero milliseconds", "remote management", "480V AC Frequency", "KIRTI NAGAR DELHI", "Parallel Operation", "proper ventilation", "Automatic shutdown", "operational status", "complete discharge", "Hot-Swap Capability", "Additional Features", "overload conditions", "Overload Protection", "connected equipment", "Communication Ports", "online architecture", "battery replacement", "Configurable output", "Management Software", "Battery Backup Time", "Output Power Factor", "monitoring solutions", "real-time monitoring", "Runtime Battery Type", "lithium-ion batteries", "General Overview Type", "Performance Efficiency", "parallel configurations", "substantial floor space", "Features User Interface", "The Vertiv 1000 kVA UPS", "various support services", "Large IT infrastructures", "Advanced software options", "external battery cabinets", "uninterrupted power supply", "three-phase Output Voltage", "Management Mounting Options", "extended service agreements", "mission-critical applications", "appropriate installation support", "Physical Specifications Dimensions", "Electrical Specifications Input Voltage", "Industrial applications Telecommunications Healthcare facilities" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 39, "imageuri": "https://bizimages.withfloats.com/actual/49025f5806e34532ae0d426f1e9fa101.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/49025f5806e34532ae0d426f1e9fa101.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-10-14T12:46:17.731Z", "updatedon": "2024-10-14T12:46:17.731Z", "buyonlinelink": null, "producturl": "https://LOCATIONS.UNIVERSALPOWER.CO.IN/BHIWADI/products/vertiv-1000-kva-ups-in-kirti-nagar-delhi/39", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "", "category": "UPS", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false } ], "hasmoreitems": false, "isapirequest": false, "totalresults": 27, "query": null, "floatingpoint": null }