Home> Products> optimal efficiency

{ "products": [ { "_id": "67de4bd9042ffb8bd0390aa7", "fptag": "UNIVERSALPOWERSYSTEMF82C", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Powerstack battery Testing ", "description": "Powerstack batteries, typically used in UPS systems, inverters, and other energy storage applications, require proper testing and maintenance to ensure their efficiency, longevity, and reliability. If you need to perform battery testing on a Powerstack battery, here's a general guide for testing and monitoring its condition:\n\nSteps to Test Powerstack Batteries:\n1. Visual Inspection\nCheck for Physical Damage: Inspect the battery casing for any cracks, leaks, or bulges. Damaged batteries should be replaced.\n\nClean the Terminals: Ensure the terminals are clean and free from corrosion. If there is any corrosion, clean the terminals with a mixture of baking soda and water.\n\n2. Check Battery Voltage\nMeasure the Open-Circuit Voltage (OCV): Use a digital voltmeter to measure the voltage across the battery terminals when it is not connected to any load. Compare the measured voltage to the battery’s rated voltage. A typical fully charged 12V lead-acid battery should read around 12.6 to 12.8 volts.\n\nFor a 24V battery, you should see a voltage of around 25.2 to 26.0 volts.\n\nUndercharged Battery: If the voltage is significantly lower (e.g., 10.5V or less for a 12V battery), it may indicate that the battery is undercharged or faulty.\n\n3. Load Testing\nTest under Load: Apply a load to the battery, simulating its normal working conditions. The load can be an inverter or UPS system that draws power from the battery. Monitor the voltage drop under load. The voltage should not drop drastically; otherwise, it may indicate that the battery is aging or weak.\n\nDC Discharge Test: If you have access to a battery analyzer or tester, you can perform a discharge test by applying a constant load and measuring the time it takes for the battery to reach a certain voltage cutoff.\n\n4. Battery Charge Test\nCharge the Battery Fully: Use the manufacturer’s recommended charger to fully charge the battery. Most Powerstack systems will charge to full capacity in 6-12 hours, depending on the charger and battery size.\n\nMonitor Charging Parameters: If the battery doesn’t charge properly or takes longer than usual, it might indicate problems with the battery or the charger.\n\nEnd of Charge Voltage: For lead-acid batteries, the end-of-charge voltage should be around 14.4 to 15.0 volts for a 12V battery and 28.8 to 30.0 volts for a 24V battery.\n\n5. Conduct a Specific Gravity Test (for Lead-Acid Batteries)\nHydrometer Test: If your Powerstack battery is a lead-acid type, you can measure the specific gravity of the electrolyte inside the battery using a hydrometer. A fully charged battery will have a specific gravity of around 1.265 – 1.280. If the reading is low, it may indicate that one or more cells are faulty.\n\n6. Perform a Battery Health Check (Advanced)\nUse a Battery Tester: There are advanced battery testers that can measure the internal resistance, capacity, and health of the battery. These testers usually simulate various load conditions and measure how well the battery performs.\n\nInternal Resistance: A higher internal resistance indicates aging and reduced capacity. A proper battery tester will show you this resistance reading, which helps in assessing the battery's remaining life.\n\n7. Monitor for Temperature\nBatteries can heat up during charging and discharging. Check for unusual temperature rises that may indicate internal problems. Excessive heat can degrade battery life and may signal an issue with the battery or the charging system.\n\nSigns of a Failing Battery:\nRapid Voltage Drop: If the voltage quickly drops under load, the battery is likely deteriorating.\n\nShort Runtime: If the battery runs out of charge much faster than expected, it could mean it's near the end of its life.\n\nInconsistent Voltage Readings: Large fluctuations in voltage readings, especially when under load, can indicate a failing battery.\n\nPhysical Damage: Swelling, leaks, or any visible damage to the battery indicates that it needs to be replaced.\n\nBattery Maintenance Tips:\nRegular Charging: Avoid deep discharges and always keep the battery charged.\n\nEnvironmental Conditions: Keep the battery in a cool, dry place to avoid overheating or damage due to extreme temperatures.\n\nPeriodic Tests: Test the battery every 3-6 months to assess its health and ensure it’s functioning properly.\n\nUse the Right Charger: Always use the manufacturer's recommended charger to prevent overcharging or undercharging.\n\nConclusion:\nBattery testing is critical for ensuring that your Powerstack battery continues to perform optimally. Regular testing helps in identifying potential problems early and maintaining the battery’s health. Always follow the manufacturer’s instructions and consult with a professional if you're unsure about the testing process.", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 248, "imageuri": "https://bizimages.withfloats.com/actual/7f2c78a976e246efbe70882f742a421a.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/f8db1555dfa447dbb73d3446e6b45940.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2025-03-22T05:34:17.551Z", "updatedon": "0001-01-01T00:00:00Z", "buyonlinelink": null, "producturl": "https://LOCATIONS.UNIVERSALPOWER.CO.IN/BHIWADI/products/powerstack-battery-testing-/248", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": null, "category": "Powerstack battery Testing ", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": null, "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "67de48f5884d97a2c7d83fde", "fptag": "UNIVERSALPOWERSYSTEMF82C", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "APC 6000VA UPS", "description": "The APC Smart-UPS RT 6000VA is a high-performance uninterruptible power supply (UPS) designed to provide reliable power protection for critical equipment in various settings such as data centers, server rooms, and industrial environments. Here are some key features and specifications:\n\nKey Features:\nPower Capacity:\n\n6000VA / 4800W – Suitable for medium-to-large systems that need substantial power backup.\n\nRack-Mountable Design:\n\nThe UPS can be mounted in a 19-inch rack, making it ideal for environments that require a space-efficient solution.\n\nExtended Runtime:\n\nIt provides sufficient runtime to safely shut down connected equipment or continue operations during short power outages, depending on the load.\n\nPure Sine Wave Output:\n\nEnsures high-quality power to sensitive equipment, avoiding power disturbances such as harmonic distortion or voltage spikes.\n\nHot-Swappable Batteries:\n\nAllows for maintenance without powering down the UPS, increasing uptime and operational efficiency.\n\nLCD Display:\n\nA user-friendly LCD display provides detailed information about the UPS status, including input/output voltage, battery charge, and runtime.\n\nExtended Battery Options:\n\nCan be connected to external battery packs for increased runtime in case of prolonged power outages.\n\nAdvanced Communication Features:\n\nOffers a variety of communication options such as USB, RS-232, or SNMP for monitoring and management. It’s compatible with APC’s PowerChute management software.\n\nEnvironmental Monitoring:\n\nSome models include environmental sensors to monitor conditions like temperature and humidity, ensuring the UPS operates in optimal conditions.\n\nSafety Features:\n\nIt includes features such as overload protection, short-circuit protection, and battery optimization to ensure safe and efficient operation.\n\nIdeal Use Cases:\nData Centers\n\nServer Rooms\n\nNetwork Equipment\n\nIndustrial and Medical Equipment", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "connected equipment", "industrial environments", "medical equipment", "ensure safe", "includes features", "ups operates", "humidity ensuring", "monitor conditions", "environmental sensors", "usb rs232", "communication options", "increased runtime", "ups status", "detailed information", "harmonic distortion", "continue operations", "safely shut", "sufficient runtime", "mediumtolarge systems", "key features", "critical equipment", "battery optimization", "efficient operation ideal", "ups increasing uptime", "external battery packs", "userfriendly lcd display", "19inch rack making" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 246, "imageuri": "https://bizimages.withfloats.com/actual/d3995dfe98b248638324f64ea6764951.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/e51da57572c347c2a60cd3afc5989bcd.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2025-03-22T05:21:57.201Z", "updatedon": "0001-01-01T00:00:00Z", "buyonlinelink": null, "producturl": "https://LOCATIONS.UNIVERSALPOWER.CO.IN/BHIWADI/products/apc-6000va-ups/246", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": null, "category": "APC 6000VA UPS", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": null, "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "67dd41a41d6a77a10da5cc00", "fptag": "UNIVERSALPOWERSYSTEMF82C", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Exide Battery", "description": "Exide Insta Brite is a range of automotive batteries known for providing reliable and high-performance power to vehicles. The Insta Brite series is specially designed to deliver superior cranking power, longer battery life, and low maintenance requirements, making it a popular choice for a wide range of vehicles. Below are the key features and details of Exide Insta Brite batteries:\n\n1. Key Features:\nHigh Cranking Power: Provides excellent starting power for engines, even under extreme weather conditions (both hot and cold).\nMaintenance-Free: Exide Insta Brite batteries are designed to be virtually maintenance-free, reducing the need for constant checks and refills.\nDurability: Built with robust construction to handle tough environments, ensuring a longer lifespan and reliable performance.\nEnhanced Safety: These batteries come with advanced safety features, reducing the risk of leakage or damage.\nShock and Vibration Resistance: Built to withstand shocks and vibrations that are common in automotive applications.\n2. Technology:\nLead-Acid Technology: Like most automotive batteries, Exide Insta Brite uses lead-acid technology, which ensures high performance, reliability, and cost-effectiveness.\nCalcium-Calcium Technology: Some variants of Exide Insta Brite incorporate calcium-calcium technology, which helps in reducing water loss and improving the overall battery performance.\nAdvanced Grid Design: This design improves the efficiency and strength of the battery, enhancing its cranking power and overall battery life.\n3. Types of Vehicles:\nPassenger Cars: Exide Insta Brite is commonly used in standard passenger vehicles like sedans, hatchbacks, and SUVs.\nTwo-Wheelers: Some models are also suitable for motorcycles and scooters.\nCommercial Vehicles: Some higher-capacity variants are suitable for commercial vehicles, including trucks and buses.\n4. Advantages:\nLonger Life: Designed to provide a longer service life, reducing the frequency of replacements.\nExcellent Starting Performance: Ensures smooth engine start-ups, especially in cold weather conditions.\nCost-Effective: Provides great value by offering a balance of performance, durability, and cost.\nEnvironmentally Friendly: Being a lead-acid battery, it is recyclable, making it more eco-friendly than some other types of batteries.\n5. Available Sizes/Models:\nExide Insta Brite batteries come in different sizes and specifications based on the vehicle’s requirements. These sizes are designed to meet the specific needs of the vehicle, whether it is a compact car or a larger commercial vehicle.\n\n6. Warranty:\nExide Insta Brite batteries often come with a manufacturer warranty, typically ranging from 12 months to 36 months depending on the model. The warranty covers manufacturing defects and performance issues, offering peace of mind for the customer.\n\n7. Maintenance:\nLow Maintenance: While it is a maintenance-free battery, users should still check the battery for any physical damage or signs of wear.\nRegular Inspections: It's recommended to periodically check the battery's charge level and connections for safety and optimal performance.\n8. Application Areas:\nAutomotive: Passenger cars, SUVs, and trucks.\nCommercial Vehicles: Larger vehicles such as buses and cargo trucks.\nMotorcycles & Two-Wheelers: Some models are designed for use in motorcycles and scooters.\n9. Price Range:\nThe price of Exide Insta Brite batteries typically ranges from INR 3,000 to INR 10,000 or more, depending on the specific model, size, and vehicle type.\n10. Availability:\nExide Insta Brite batteries are widely available through Exide dealers, automotive battery retailers, and online platforms in various regions.\n11. Popular Models in the Insta Brite Series:\nExide Insta Brite IB 100: Known for high starting power, suitable for a range of vehicles.\nExide Insta Brite IB 120: Offers more power for larger vehicles.\nExide Insta Brite IB 150: Ideal for commercial vehicles, providing reliable performance under heavy load conditions.", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "inr 10000", "inr 3000", "batteries 5", "12 months", "36 months depending", "specially designed", "wide range", "automotive batteries", "periodically check", "highercapacity variants", "online platforms", "physical damage", "compact car", "vehicles requirements", "specifications based", "recyclable making", "leadacid battery", "suvs twowheelers", "sedans hatchbacks", "cranking power", "battery enhancing", "design improves", "withstand shocks", "damage shock", "longer lifespan", "robust construction", "constant checks", "key features", "popular choice", "highperformance power", "providing reliable", "performance durability", "commercial vehicles", "leadacid technology", "specific model size", "scooters commercial vehicles", "maintenancefree battery users", "standard passenger vehicles", "excellent starting power", "costeffectiveness calciumcalcium technology", "refills durability built", "heavy load conditions", "batterys charge level", "wear regular inspections", "cost environmentally friendly", "reducing water loss", "vibration resistance built", "virtually maintenancefree reducing", "extreme weather conditions", "insta brite series" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 243, "imageuri": "https://bizimages.withfloats.com/actual/82ffa45517f2457a94d98f5c15b57c60.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/e4d494d3f2d540c7bc8ec3cf6d092338.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2025-03-21T10:38:28.789Z", "updatedon": "0001-01-01T00:00:00Z", "buyonlinelink": null, "producturl": "https://LOCATIONS.UNIVERSALPOWER.CO.IN/BHIWADI/products/exide-battery/243", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": null, "category": "Exide Battery", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": null, "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "67d90098033d2a4a9b171794", "fptag": "UNIVERSALPOWERSYSTEMF82C", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Vertiv 60 kVA UPS", "description": "The Vertiv 60 kVA Online UPS is an uninterruptible power supply (UPS) designed to provide reliable and continuous power to critical equipment in case of power interruptions. Here are some key details and features typically associated with this kind of UPS:\n\nKey Features:\nOnline UPS Technology: The Vertiv 60 kVA UPS uses online double-conversion technology, meaning it provides constant, clean, and stable power to connected equipment by continuously converting incoming AC power to DC and then back to AC.\n\nHigh Capacity: With a capacity of 60 kVA (kilo volt-amperes), this UPS is ideal for medium to large-sized businesses or industrial applications that require a significant amount of power protection, such as data centers, manufacturing equipment, or IT infrastructure.\n\nEnergy Efficiency: These systems are typically designed to offer high efficiency, reducing operational costs while maintaining reliable performance. Some models offer \"eco-mode\" functionality to optimize efficiency during non-critical times.\n\nBattery Management: Vertiv UPS units generally feature advanced battery management technology that ensures longer battery life, more efficient charging, and optimal performance. The batteries are usually hot-swappable, allowing for maintenance without shutting down the system.\n\nCompact Design: Despite its high capacity, the Vertiv 60 kVA Online UPS is designed to have a relatively compact form factor, making it easier to integrate into limited spaces in data centers or industrial settings.\n\nCommunication and Monitoring: Many Vertiv UPS systems come equipped with intelligent monitoring systems that allow users to track performance, status, and any faults. This can often be done remotely through a web interface or software.\n\nBypass Capability: Some models offer an internal bypass, which allows the load to continue operating even during maintenance or if the UPS needs to be shut down for any reason.\n\nTypical Applications:\nData Centers: Ensuring that critical server equipment continues running during power interruptions.\nIndustrial Automation: Protecting machinery and control systems from voltage sags or outages.\nHealthcare: Protecting medical equipment that is sensitive to power fluctuations.\nTelecommunications: Ensuring consistent power supply to communication infrastructure.\nAdvantages:\nContinuous Power Protection: Ideal for environments where power outages can cause data loss, downtime, or even equipment damage.\nScalability: Can be paired with additional units or battery banks for higher power requirements.\nReliability: The Vertiv brand is well-regarded in the power protection industry for producing durable and dependable UPS systems.", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "typically designed", "producing durable", "battery banks", "additional units", "voltage sags", "continue operating", "models offer", "web interface", "limited spaces", "hotswappable allowing", "efficient charging", "significant amount", "largesized businesses", "constant clean", "features typically", "key details", "power outages", "stable power", "power interruptions", "continuous power", "connected equipment", "critical equipment", "control systems", "vertiv brand", "internal bypass", "data centers", "high capacity", "optimize efficiency", "industrial applications", "provide reliable", "optimal performance", "power protection", "vertiv ups systems", "dependable ups systems", "intelligent monitoring systems", "ac high capacity", "power protection industry", "maintaining reliable performance", "equipment damage scalability", "data loss downtime", "software bypass capability", "industrial settings communication", "infrastructure energy efficiency", "track performance status", "system compact design" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 238, "imageuri": "https://bizimages.withfloats.com/actual/8c2090e09b2a49db9e1f26dfd89e66ad.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/8c2090e09b2a49db9e1f26dfd89e66ad.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2025-03-18T05:11:52.413Z", "updatedon": "0001-01-01T00:00:00Z", "buyonlinelink": null, "producturl": "https://LOCATIONS.UNIVERSALPOWER.CO.IN/BHIWADI/products/vertiv-60-kva-ups/238", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": null, "category": "Vertiv 60 kVA UPS", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": null, "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "67d5300cc75e6ecb0a24be44", "fptag": "UNIVERSALPOWERSYSTEMF82C", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "10 kW solar system installed at M3M", "description": "Universal Power team has installed a 10 kW solar system 18 panel at M3M\nKey Details of the Installation:\nSolar System Size:\n\n10 kW refers to the capacity of the solar system. This means the system is designed to generate up to 10 kilowatts (kW) of power under optimal sunlight conditions.\nNumber of Panels:\n\n18 solar panels have been installed. To estimate the power output of each panel, we can divide the system\\'s total capacity by the number of panels.\n10 kW / 18 panels = approximately 555 watts per panel.\nThis indicates that each panel is likely rated around 555W, which is a common wattage for high-efficiency solar panels used in residential and commercial systems.\nLocation – M3M:\n\nM3M could be a residential complex, office building, or another commercial facility. Without more specific information, M3M could refer to the area or project where the installation took place. If it’s a large-scale installation, such as for an office or commercial building, the solar panels are likely being used to reduce energy costs and carbon footprint.\nEnergy Production:\n\nThe energy output of the system will depend on several factors, including the amount of sunlight received, panel orientation, and local weather conditions.\nIn an area with good sunlight, a 10 kW system could produce roughly 40-50 kWh per day on average, depending on the solar irradiance and hours of sunlight in that region. Over a year, this could amount to around 14, 600 to 18, 250 kWh of electricity.\nPurpose:\n\nThe solar power system could be installed for various reasons:\nTo reduce energy bills by using clean solar energy.\nTo support sustainability goals, reduce carbon emissions, and make the building or facility more energy-efficient.\nTo provide backup power or support the grid, especially in commercial or industrial settings.\nBenefits of a 10 kW Solar System:\nReduced Electricity Costs: By producing energy from the sun, the system reduces reliance on grid power, thus lowering electricity bills over time.\nEnvironmental Impact: The system helps reduce carbon footprints by utilizing renewable energy instead of fossil fuels.\nIncreased Property Value: Properties with solar installations are often valued higher due to the long-term savings on energy costs.\nGovernment Incentives: Depending on the region, there may be tax credits, subsidies, or incentives available for installing solar energy systems.", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "14 600", "18 250 kwh", "commercial building", "commercial facility", "good sunlight", "largescale installation", "grid power", "longterm savings", "average depending", "10 kw system", "common wattage", "10 kilowatts kw", "power output", "solar installations", "solar irradiance", "solar system", "electricity purpose", "producing energy", "energy output", "solar panels", "solar power system", "highefficiency solar panels", "system reduces reliance", "systems total capacity", "clean solar energy", "provide backup power", "m3muniversal power team", "lowering electricity bills", "utilizing renewable energy", "reduce energy bills", "reduce energy costs", "tax credits subsidies", "valued higher due", "time environmental impact", "industrial settings benefits", "local weather conditions", "specific information m3m", "m3m key details" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 230, "imageuri": "https://bizimages.withfloats.com/actual/1313f8f1b9074854b81e45cc2e194064.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/1313f8f1b9074854b81e45cc2e194064.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2025-03-15T07:45:16.544Z", "updatedon": "0001-01-01T00:00:00Z", "buyonlinelink": null, "producturl": "https://LOCATIONS.UNIVERSALPOWER.CO.IN/BHIWADI/products/10-kw-solar-system-installed-at-m3m/230", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": null, "category": "10 kW solar system installed at M3M", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": null, "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "67d52d8a4507f670f3d4fa58", "fptag": "UNIVERSALPOWERSYSTEMF82C", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Emerson 3-Phase Ups In Manesar", "description": "Emerson 3-Phase UPS (Uninterruptible Power Supply) systems are high-quality, reliable power backup solutions typically used in industrial, commercial, and critical infrastructure applications. These systems are designed to provide uninterrupted power to sensitive equipment, preventing downtime due to power interruptions, voltage fluctuations, or other electrical issues.\n\nKey Features of Emerson 3-Phase UPS:\nPower Capacity:\n\n3-Phase UPS systems come in a wide range of power capacities, generally from 10 kVA to 800 kVA or even higher, depending on the model.\nSuitable for medium to large-scale facilities like data centers, hospitals, manufacturing plants, and office buildings.\nTechnology:\n\nDouble Conversion Online Technology: Emerson’s 3-phase UPS systems typically use online double conversion technology, meaning that the inverter constantly supplies clean, regulated power to the load while the battery is charging.\nEfficiency: High-efficiency models (up to 96% or more) reduce energy consumption and operating costs.\nBattery Management: Integrated advanced battery management for monitoring health, charge, and backup times.\nHigh Availability:\n\nDesigned to provide reliable power for mission-critical applications.\nHot Swappable Batteries: In some models, batteries can be replaced without shutting down the UPS, ensuring uninterrupted power supply.\nScalability: Many models allow for modular expansion, meaning you can add additional capacity as needed.\nInput/Output Voltage:\n\nInput Voltage: Common input voltages are 380V, 400V, and 415V (3-phase).\nOutput Voltage: Typically 208V, 220V, 230V, or 400V for 3-phase systems, depending on the regional power grid standards.\nPower Factor: Emerson UPS systems usually have a high power factor of 0.9 or higher, improving efficiency.\nAdvanced Features:\n\nLCD/LED Display: Provides real-time data on UPS status, battery health, load levels, and alarms for easy monitoring.\nRemote Monitoring: Allows remote access for monitoring via web or SNMP (Simple Network Management Protocol) for real-time alerts and diagnostics.\nBypass Capability: If maintenance is required or the UPS is malfunctioning, the system can transfer to bypass mode to avoid downtime.\nDesign and Durability:\n\nCompact Design: Many models are designed to be space-efficient without compromising on power or cooling needs.\nRack-Mountable or Tower Formats: Depending on the installation space, Emerson offers both tower-style and rack-mounted designs.\nThermal Management: These UPS systems typically include advanced cooling systems to maintain efficient operation and prevent overheating.\nApplications:\n\nData Centers: Ensures uptime for servers and networking equipment.\nIndustrial Equipment: Protects critical machinery and automated systems from power failures.\nTelecommunications: Keeps communication systems running without interruption.\nHospitals: Supports life-saving equipment and systems that require constant power.\nCommercial Buildings: Ensures backup power for office systems and equipment.\nMaintenance and Service:\n\nSmart Battery Testing: Advanced systems monitor the health of batteries and alert users when maintenance or replacement is required.\nServiceable Parts: Emerson provides comprehensive support and service contracts to ensure your UPS remains in optimal condition.\nProactive Monitoring: With remote monitoring and diagnostic tools, faults can be detected before they impact operations.\nPopular Models:\nEmerson (now part of Vertiv) offers various UPS models under different series, such as:\n\nVertiv Liebert® ITA2: A high-efficiency 3-phase UPS solution for small to medium-sized applications.\nVertiv Liebert® EXL S1: A modular UPS system that offers scalability and high availability.\nVertiv Liebert® NXL: A large capacity 3-phase UPS designed for data centers and industrial applications.\nAdvantages of Emerson 3-Phase UPS:\nHigh Reliability: Ensures critical equipment remains powered during power failures or fluctuations.\nAdvanced Technology: Features like online double conversion, modular design, and remote monitoring provide superior performance and flexibility.\nEnergy Efficiency: Many Emerson UPS systems are highly efficient, reducing operating costs and environmental impact.\nScalability: As your power requirements grow, Emerson's modular systems can easily expand to meet increased demand.\n\nConclusion:\nEmerson 3-Phase UPS systems are excellent solutions for businesses and facilities that require high uptime and reliability. With their advanced features, efficient energy use, and robust design, they provide essential power protection for critical infrastructure. Whether you're in need of a UPS for a small office or a large data center, Emerson offers scalable and reliable power backup systems that ensure uninterrupted operation.", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "800 kva", "10 kva", "models batteries", "equipment maintenance", "small office", "380v 400v", "largescale facilities", "ups models", "excellent solutions", "easily expand", "data centers", "remote monitoring", "service contracts", "comprehensive support", "alert users", "realtime alerts", "remote access", "realtime data", "model suitable", "wide range", "ups remains", "office systems", "automated systems", "offers scalability", "vertiv offers", "bypass mode", "industrial commercial", "robust design", "higher depending", "critical infrastructure", "power failures", "monitoring health charge", "modular ups system", "advanced cooling systems", "emerson ups systems", "ups systems typically", "ensure uninterrupted operation", "3phase systems depending", "critical infrastructure applications", "power failures telecommunications", "emerson 3phase ups", "communication systems running", "environmental impact scalability", "industrial applications advantages", "vertiv liebert ita2", "diagnostics bypass capability", "high power factor", "provide reliable power", "power capacities generally", "provide uninterrupted power", "tower formats depending", "durability compact design", "avoid downtime design", "require high uptime", "flexibility energy efficiency", "diagnostic tools faults", "maintain efficient operation", "add additional capacity", "modular expansion meaning", "reduce energy consumption" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 229, "imageuri": "https://bizimages.withfloats.com/actual/187708a304fa44f1b41acc0e625a7a30.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/187708a304fa44f1b41acc0e625a7a30.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2025-03-15T07:34:34.549Z", "updatedon": "0001-01-01T00:00:00Z", "buyonlinelink": null, "producturl": "https://LOCATIONS.UNIVERSALPOWER.CO.IN/BHIWADI/products/emerson-3-phase-ups-in-manesar/229", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": null, "category": "Emerson 3-Phase Ups In Manesar", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": null, "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "67d528eac771a0b558701ee6", "fptag": "UNIVERSALPOWERSYSTEMF82C", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "5 kW solar system installed at nooh school", "description": "Universal Power team has installed a 5 kW solar system at nooh school\nKey Details of the 5 kW Solar System Installation at Nooh School:\nSolar Power Generation:\n\nA 5 kW system typically generates around 20-25 kWh per day depending on sunlight hours and weather conditions.\nAnnual Energy Production: The system could produce around 7, 300 to 9, 125 kWh annually, which can cover a significant portion of the school\\'s energy needs.\nSystem Components:\n\nSolar Panels: Typically, 15-20 panels with a capacity of around 250W-330W each.\nInverter: A 5 kW inverter is used to convert the DC power produced by the panels into AC power.\nMounting Structure: The solar panels are mounted on the roof or ground, depending on the school\\'s infrastructure.\nGrid Connection: The system is likely connected to the grid, allowing excess energy to be fed back into the grid via net metering, helping reduce electricity costs for the school.\nBenefits for Nooh School:\n\nCost Savings: The school will benefit from reduced electricity bills by offsetting its grid power usage with solar energy.\nSustainability: The system will contribute to a reduction in carbon emissions, helping the school be more environmentally responsible.\nEducational Opportunity: The solar installation can serve as a live example for students, providing them with a practical demonstration of renewable energy technology.\nMaintenance:\n\nThe system requires minimal maintenance, with occasional cleaning of the panels to ensure optimal performance.\nPanel Lifespan: Solar panels generally last around 25-30 years, with a slight decline in efficiency over time.\nInverter Lifespan: Inverters typically last around 10-15 years before needing replacement.\nConclusion:\nThe 5 kW solar system installed by Universal Power Team at Nooh School will provide long-term benefits, including reduced electricity costs, environmental sustainability, and educational opportunities for students to learn about solar energy. If more detailed information is needed, contacting Universal Power Team or the school would provide the specifics of the installation.", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "7 300", "1015 years", "2530 years", "2025 kwh", "nooh school", "students providing", "5 kw inverter", "solar panels", "solar installation", "school benefits", "detailed information", "educational opportunities", "slight decline", "occasional cleaning", "practical demonstration", "fed back", "ground depending", "significant portion", "sunlight hours", "day depending", "schools energy", "solar energy", "provide longterm benefits", "solar energy sustainability", "grid power usage", "universal power team", "needing replacement conclusion", "carbon emissions helping", "reduced electricity bills", "dc power produced" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 226, "imageuri": "https://bizimages.withfloats.com/actual/8fca088272e74bfe886c4d474ba375e3.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/8fca088272e74bfe886c4d474ba375e3.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2025-03-15T07:14:50.122Z", "updatedon": "0001-01-01T00:00:00Z", "buyonlinelink": null, "producturl": "https://LOCATIONS.UNIVERSALPOWER.CO.IN/BHIWADI/products/5-kw-solar-system-installed-at-nooh-school/226", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": null, "category": "5 kW solar system installed at nooh school", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": null, "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "67d13bdce4742340934b9803", "fptag": "UNIVERSALPOWERSYSTEMF82C", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "VERTIV ITA UPS", "description": "The Vertiv Liebert ITA 5kVA Online UPS is designed for small computer rooms and network equipment, offering reliable power protection. Key features include a compact design, high power factor, scalable battery runtimes, and options for rackmount or tower configurations. For detailed specifications, you can refer to the datasheets available online. ### Key Specifications\n\nModel: Vertiv Liebert ITA 5kVA\nType: Online UPS\nPower Rating: 5 kVA\nInput Voltage Range: Wide input voltage range, ensuring immunity to grid interference\nOutput Voltage: Typically 230V (single phase)\nEfficiency: High efficiency, contributing to lower operational costs\nKey Features\nDouble Conversion Technology: Provides clean and consistent power, protecting sensitive equipment from power disturbances.\nProgrammable Output: Features programmable output outlets with cascade protection for critical devices during heavy loads.\nIntegrated Monitoring: Comes with an integrated Ethernet port for remote monitoring via HTTP protocol.\nUser -Friendly Interface: Gravity sense LCD display for easy monitoring and management.\nRobust Design: Built with a cutting-edge channelized airflow design for optimal cooling and performance.\nApplications\nData Centers: Ideal for protecting servers and networking equipment.\nTelecommunications: Suitable for telecom applications requiring uninterrupted power.\nHealthcare: Ensures reliable power for critical medical equipment.\n\nConclusion\nThe Vertiv Liebert ITA 5kVA Online UPS is a robust solution for various applications requiring reliable power protection. Its advanced features and high efficiency make it a suitable choice for businesses looking to safeguard their critical equipment against power interruptions. Always consult with suppliers for the latest pricing and availability.", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "latest pricing", "power interruptions", "critical equipment", "suitable choice", "advanced features", "robust solution", "protecting servers", "optimal cooling", "easy monitoring", "remote monitoring", "critical devices", "cascade protection", "detailed specifications", "tower configurations", "high efficiency make", "integrated ethernet port", "small computer rooms" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 220, "imageuri": "https://bizimages.withfloats.com/actual/fc1571c714dc46829c5783343e8dc60a.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/fc1571c714dc46829c5783343e8dc60a.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2025-03-12T07:46:36.639Z", "updatedon": "0001-01-01T00:00:00Z", "buyonlinelink": null, "producturl": "https://LOCATIONS.UNIVERSALPOWER.CO.IN/BHIWADI/products/vertiv-ita-ups/220", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": null, "category": "VERTIV ITA UPS", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": null, "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "67ce7b0c822ea958d4bd63bf", "fptag": "UNIVERSALPOWERSYSTEMF82C", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Eaton 9395P UPS", "description": "The Eaton 9395P UPS is a high-performance uninterruptible power supply designed for critical applications. It features a three-phase online design with power ratings ranging from 250 to 1200 kVA, utilizing advanced technology for high efficiency and scalability.\n\nKey Specifications\nPower Ratings: 250-1200 kVA\nInput Voltage: Typically 480V, with options for 400V or 600V\nEfficiency: High double conversion efficiency with reduced energy losses\nBattery Types: Supports VRLA, AGM, and wet cell batteries\nOverload Capacity: 110% for 10 minutes, 125% for 2 minutes, 150% for 15 seconds\nDisplay: 7” or 10” touchscreen for monitoring and control\nFeatures\nModular Design: Allows for easy scalability and maintenance.\nAdvanced Monitoring: Provides real-time data and alerts for optimal performance.\nCompact Footprint: Designed to maximize power density in limited spaces.\nApplications\nIdeal for data centers, telecommunications, and industrial environments where reliable power is critical. For more detailed specifications, you can refer to the official Eaton documentation. ### Additional Features\n\nEnergy Saver System (ESS):\n\nAchieves up to 99% efficiency, significantly reducing operational costs.\nThree-Level Converter Design:\n\nReduces stress on components, extending their lifespan and reliability.\nHeat Reduction:\n\nProduces 33% less heat, leading to lower HVAC costs.\nIncreased Power Density:\n\nOffers up to 20% more power in the same footprint compared to previous models.\nRedundancy:\n\nModular design ensures inherent redundancy, preventing dropped loads.\nBattery Information\nBattery System:\nExternal battery systems are used, with options for lead-acid or lithium batteries.\nBatteries Included:\nTypically, batteries are not included and must be purchased separately.\nLead Time\nAvailability:\nEstimated lead time for delivery is 20+ weeks, depending on configuration and order specifics.\nTarget Markets\nEnterprise Data Centers:\n\nProvides robust power protection for critical IT infrastructure.\nColocation Facilities:\n\nSupports multiple clients with varying power needs.\nServer Farms and Telecommunications:\n\nEnsures uptime for essential services and applications.\nHealthcare and Financial Systems:\n\nProtects sensitive equipment and data from power interruptions.\nConclusion\nThe Eaton 9395P UPS is engineered for high efficiency and reliability, making it an excellent choice for organizations that require uninterrupted power supply. Its modular design, advanced features, and scalability cater to a wide range of applications, ensuring that critical systems remain operational during power disturbances. For further details, consult the official Eaton website or authorized distributors.", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "10 touchscreen", "2 minutes 150", "10 minutes 125", "critical applications", "authorized distributors", "details consult", "applications ensuring", "wide range", "scalability cater", "excellent choice", "reliability making", "applications healthcare", "essential services", "server farms", "20 weeks depending", "footprint compared", "heat leading", "components extending", "detailed specifications", "industrial environments", "realtime data", "easy scalability", "high efficiency", "power disturbances", "varying power", "reliable power", "official eaton", "data centers telecommunications", "maintenance advanced monitoring", "power interruptions conclusion", "robust power protection", "maximize power density", "power ratings ranging", "eaton 9395p ups", "telecommunications ensures uptime", "threephase online design" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 211, "imageuri": "https://bizimages.withfloats.com/actual/cd52a8efedb846edb2d9eb30f5c3eec4.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/cd52a8efedb846edb2d9eb30f5c3eec4.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2025-03-10T05:39:24.501Z", "updatedon": "0001-01-01T00:00:00Z", "buyonlinelink": null, "producturl": "https://LOCATIONS.UNIVERSALPOWER.CO.IN/BHIWADI/products/eaton-9395p-ups/211", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": null, "category": "Eaton 9395P UPS", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": null, "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false } ], "hasmoreitems": false, "isapirequest": false, "totalresults": 27, "query": null, "floatingpoint": null }