Products

Using Amaron batteries with Numeric UPS systems can provide reliable backup power for various applications. Here’s a detailed overview of compatibility, installation, and benefits: Numeric UPS Overview Purpose: Offers backup power during outages and protects connected devices from voltage fluctuations and surges. Types: Available for home, office, and industrial applications, with models suited for different loads. Key Features: Advanced Microprocessor Control: Enhances efficiency and performance. LCD Display: Shows battery status, load level, and other important information. Wide Input Voltage Range: Handles unstable voltage conditions. Amaron Batteries Overview Type: Primarily lead-acid (deep-cycle) batteries, often maintenance-free. Voltage Options: Commonly available in 12V, suitable for Numeric UPS systems. Capacity: Ranges from 46Ah to over 200Ah, depending on your power needs. Compatibility Voltage Matching: Ensure the Amaron battery’s voltage (e.g., 12V) matches the UPS system’s requirements. Capacity Considerations: Choose a battery capacity that supports the load you plan to connect. Calculate based on the total wattage of devices and desired backup duration. Installation Connecting the Battery: Connect the positive (+) terminal of the Amaron battery to the UPS positive terminal. Connect the negative (-) terminal of the battery to the UPS negative terminal. Secure Connections: Ensure all connections are tight to prevent arcing and ensure effective power transfer. Performance Benefits Extended Backup Time: Higher capacity Amaron batteries can provide longer run times during outages. Deep Cycle Capability: Designed to handle regular deep discharges, making them ideal for UPS applications. Low Maintenance Needs: Many Amaron models require minimal maintenance, enhancing convenience. Maintenance Regular Inspections: Check connections periodically for corrosion and ensure tightness. Battery Monitoring: Use a multimeter or UPS diagnostics to monitor battery health and voltage. Replacement Indicators: Be alert for signs of performance degradation, such as decreased backup time. Safety Precautions Proper Ventilation: Ensure the UPS and battery are in a well-ventilated area to prevent gas buildup, particularly with lead-acid batteries. Charging Practices: Follow guidelines to avoid overcharging, which can harm the battery. Conclusion Combining Amaron batteries with Numeric UPS systems creates a reliable backup power solution, ensuring that your devices remain protected and operational during outages. Always refer to the specific user manuals for both the UPS and the batteries for proper installation and compatibility guidelines. This pairing can significantly enhance your power reliability and efficiency.

Using Amaron batteries with Luminous UPS systems can enhance your power backup solution. Here’s a detailed overview of compatibility, installation, and benefits: Luminous UPS Overview Purpose: Provides backup power during outages and protects against voltage fluctuations. Types: Includes models for home use, office applications, and larger systems for commercial use. Key Features: Microprocessor Control: Offers advanced features for better performance. Wide Input Voltage Range: Suitable for areas with unstable voltage. LED Indicators: Show battery status, load level, and system alerts. Amaron Batteries Overview Type: Primarily lead-acid (deep-cycle) batteries, often maintenance-free. Voltage Options: Commonly available in 12V, suitable for use with Luminous UPS systems. Capacity: Ranges from 46Ah to 200Ah or more, allowing for various backup durations. Compatibility Voltage Matching: Ensure that the Amaron battery’s voltage (e.g., 12V) matches the UPS input requirements. Capacity Considerations: Select a battery capacity that meets the power demands of your connected devices and desired runtime. Calculate based on total load and expected outage duration. Installation Connecting the Battery: Connect the positive (+) terminal of the Amaron battery to the UPS positive terminal. Connect the negative (-) terminal of the battery to the UPS negative terminal. Secure Connections: Make sure all connections are tight to avoid arcing and ensure efficient power transfer. Performance Benefits Extended Runtime: Higher capacity Amaron batteries can provide longer backup times, especially during prolonged outages. Durability: Amaron batteries are designed to handle deep discharges, making them ideal for UPS applications. Low Maintenance Options: Many models require minimal maintenance, simplifying user experience. Maintenance Regular Inspections: Periodically check the UPS and battery connections for corrosion and ensure tightness. Battery Monitoring: Use a multimeter or UPS diagnostics to monitor battery health and voltage. Replacement Indicators: Be aware of performance degradation signs, such as reduced backup time or inability to hold charge. Safety Precautions Ventilation: Ensure good ventilation around the UPS and battery to prevent gas accumulation, especially for lead-acid types. Charging Practices: Monitor the charging process to prevent overcharging, which can damage the battery. Conclusion Pairing Amaron batteries with Luminous UPS systems can create a robust and reliable backup power solution. Always consult the specific user manuals for both the UPS and the batteries to ensure proper installation and compatibility. This approach not only enhances your power reliability but also optimizes performance during outages.

Testing Amaron batteries, or any lead-acid batteries, involves a few key procedures to assess their performance and health. Here are the common methods: 1. Visual Inspection Check for Damage: Look for any cracks, leaks, or bulges in the casing. Terminals: Ensure that the terminals are clean and free of corrosion. 2. Voltage Test Using a Multimeter: Measure the voltage across the battery terminals. A fully charged 12V battery should read around 12.6 to 12.8 volts. A reading below 12.4 volts indicates that the battery may be partially discharged, and below 12.0 volts typically means it needs charging. 3. Load Test Using a Load Tester: Apply a load that is about half of the battery's rated capacity (for a 46Ah battery, use a 23A load) for about 10-15 seconds. Voltage Drop: Measure the voltage during the load test. It should not drop below 9.6 volts. A significant drop indicates a weak battery. 4. Specific Gravity Test Hydrometer: If the battery is serviceable, use a hydrometer to check the specific gravity of the electrolyte. Readings: A specific gravity of around 1.265 indicates a fully charged state, while lower readings suggest a need for charging. 5. State of Charge (SOC) Charging and Discharging Cycles: Monitor how well the battery holds its charge over multiple cycles. A significant drop in capacity indicates aging or damage. 6. Internal Resistance Test Impedance Tester: This specialized equipment measures the internal resistance of the battery. Higher resistance can indicate degradation. 7. Temperature Check Surface Temperature: During charging and discharging, ensure the battery doesn’t get excessively hot. Overheating can indicate problems. 8. Cycle Testing Deep Cycle Applications: If used in deep cycle applications, monitor performance over multiple charge-discharge cycles to assess capacity retention. Safety Precautions Always wear protective gear when handling batteries. Work in a well-ventilated area to avoid gas buildup. Follow manufacturer guidelines for testing and maintenance. Regular testing can help ensure optimal performance and extend the lifespan of your Amaron battery.

The Amaron Quanta 12V 46Ah battery is designed primarily for use in a variety of applications, including inverters and backup power systems. Here are the key details: Specifications: Voltage: 12V Capacity: 46Ah (Ampere-hours) Type: Lead-acid battery, generally maintenance-free Technology: Often uses a combination of advanced lead-calcium technology to enhance performance and lifespan. Features: Longer Life: Designed for deep cycle applications, with a longer life expectancy compared to traditional batteries. Durability: Built to withstand deep discharges and heavy loads. Low Maintenance: Sealed design reduces the need for regular maintenance. Vibration Resistant: Suitable for a range of environmental conditions. Applications: Inverter Systems: Commonly used in home inverter systems for backup power. Solar Applications: Compatible with solar power setups for energy storage. Uninterruptible Power Supplies (UPS): Can be used in UPS systems for critical equipment. Performance: Cycle Life: Typically offers a good cycle life with proper charging and discharging practices. Self-Discharge Rate: Relatively low self-discharge rate, allowing for longer storage periods without significant loss of charge. Installation and Maintenance: Installation: Generally straightforward, but should be done according to manufacturer guidelines. Maintenance: Minimal; periodic checks on connections and cleanliness are recommended. Safety: Ventilation: Ensure proper ventilation during charging to avoid gas accumulation. Protection Features: Many models come with built-in protection against overcharging and short circuits. For precise specifications, including dimensions and weight, it’s best to consult the manufacturer's datasheet or product manual.

Battery Cells are the fundamental building blocks of batteries. They convert chemical energy into electrical energy through electrochemical reactions. Each cell typically consists of an anode, a cathode, an electrolyte, and a separator. Types of Battery Cells Lead-Acid Cells Components: Lead dioxide (cathode), sponge lead (anode), sulfuric acid (electrolyte). Characteristics: Voltage: Typically 2V per cell. Rechargeable: Yes (flooded, AGM, or gel). Applications: Automotive batteries, UPS systems, and backup power. Nickel-Cadmium (NiCd) Cells Components: Nickel hydroxide (cathode), cadmium (anode), potassium hydroxide (electrolyte). Characteristics: Voltage: 1.2V per cell. Rechargeable: Yes. Applications: Power tools, emergency lighting, and some medical devices. Nickel-Metal Hydride (NiMH) Cells Components: Nickel hydroxide (cathode), hydrogen-absorbing alloy (anode), potassium hydroxide (electrolyte). Characteristics: Voltage: 1.2V per cell. Rechargeable: Yes. Applications: Hybrid vehicles, rechargeable batteries for consumer electronics. Lithium-Ion (Li-ion) Cells Components: Lithium cobalt oxide or lithium iron phosphate (cathode), graphite (anode), lithium salt in organic solvent (electrolyte). Characteristics: Voltage: 3.6V to 3.7V per cell. Rechargeable: Yes. Applications: Smartphones, laptops, electric vehicles, and energy storage systems. Lithium Polymer (LiPo) Cells Components: Similar to Li-ion but use a polymer electrolyte. Characteristics: Voltage: 3.7V per cell. Rechargeable: Yes. Applications: Drones, RC vehicles, and portable devices due to lightweight and flexibility. Alkaline Cells Components: Zinc (anode), manganese dioxide (cathode), potassium hydroxide (electrolyte). Characteristics: Voltage: 1.5V per cell. Non-rechargeable (disposable). Applications: Household devices, flashlights, and remote controls. Zinc-Carbon Cells Components: Zinc (anode), manganese dioxide (cathode), ammonium chloride (electrolyte). Characteristics: Voltage: 1.5V per cell. Non-rechargeable (disposable). Applications: Low-drain devices like clocks and toys. Components of Battery Cells Anode: The negative electrode where oxidation occurs. Cathode: The positive electrode where reduction takes place. Electrolyte: A medium that allows ionic movement between the anode and cathode. Separator: A barrier that prevents direct contact between anode and cathode while allowing ionic flow. Characteristics of Battery Cells Voltage: The electric potential difference; varies by cell type. Capacity: Measured in Ampere-hours (Ah), indicates how much charge a battery can store. Energy Density: Amount of energy stored per unit volume or weight, typically measured in Wh/kg. Cycle Life: Number of charge/discharge cycles before capacity drops significantly. Self-Discharge Rate: Rate at which a battery loses its charge when not in use. Applications of Battery Cells Consumer Electronics: Smartphones, laptops, tablets. Automotive: Electric vehicles, hybrid vehicles, starting batteries. Industrial: Forklifts, backup power for servers and telecommunications. Renewable Energy: Solar energy storage systems and grid storage. Portable Devices: Cameras, drones, and power tools. Conclusion Battery cells are essential components in various applications, providing energy storage and supply. Understanding the types, characteristics, and applications helps in selecting the right battery for specific needs. Always consider factors like voltage, capacity, and intended use when working with batteries.

Repairing an APC UPS (Uninterruptible Power Supply) involves troubleshooting and addressing common issues that can arise over time. Here’s a comprehensive guide to help you diagnose and repair your APC UPS: Safety Precautions Disconnect Power: Always unplug the UPS before performing any repairs or inspections. Use PPE: Wear safety goggles and gloves to protect against electric shock. Work in a Ventilated Area: Ensure good airflow to prevent overheating. Common Issues and Solutions 1. UPS Won\\'t Turn On Check Power Source: Ensure the UPS is plugged in and the outlet is functional. Test the power cord for damage. Battery Issues: Inspect the battery for swelling, leaks, or corrosion. Use a multimeter to check battery voltage; if it\\'s significantly low, it may need replacement. 2. Battery Replacement Identify Battery Type: Refer to the user manual for the specific battery model. Remove the Old Battery: Open the UPS case (usually requires a screwdriver). Disconnect the old battery, noting the connections. Install the New Battery: Connect the new battery securely. Close the UPS case and ensure all screws are tightened. 3. Overheating Check Ventilation: Ensure that the UPS is in a well-ventilated area. Clear any obstructions around vents. Inspect Fans: Check if the internal fans are operational. Clean any dust accumulation. 4. Frequent Alarms or Beeping Load Issues: Ensure that the connected load does not exceed the UPS capacity. Disconnect non-essential devices and see if the alarm stops. Battery Health: Run a self-test (if your model supports it) to check battery status. 5. Self-Test Failure Check Battery Voltage: Use a multimeter to check the voltage of the battery. Replace if below the recommended level. Internal Issues: If the self-test consistently fails, the internal circuitry might need inspection by a professional. Tools and Equipment Needed Multimeter (for voltage checks) Screwdriver set Replacement batteries (as needed) Cleaning cloth or compressed air (for dust removal) Safety equipment (gloves, goggles) General Repair Steps Visual Inspection: Check for any visible signs of damage, such as burnt components or damaged connectors. Inspect for loose wires and connections. Testing Components: Batteries: Measure the voltage and ensure it\\'s within specifications. Fuses: Check fuses for continuity. Replace blown fuses as needed. Fans and Circuits: Ensure fans are operational and listen for unusual noises. Reassembly: After repairs, carefully reassemble the UPS. Ensure all screws and connections are secure before powering on. Testing the UPS: Once reassembled, plug in the UPS and perform a test by connecting a load. Monitor the UPS for any abnormal behavior. Conclusion Repairing an APC UPS can often be straightforward, particularly when it comes to replacing batteries or troubleshooting common issues. However, if the problem persists or if you are unsure about the repair process, it’s advisable to contact a professional technician or the manufacturer for support. Always refer to the specific user manual for detailed instructions related to your UPS model.

Repairing and charging Amaron batteries (or any lead-acid battery) requires caution and adherence to safety procedures. Here’s a comprehensive guide on how to repair and charge Amaron batteries: Safety Precautions Personal Protective Equipment (PPE): Always wear safety goggles and gloves. Ventilation: Work in a well-ventilated area to avoid inhaling harmful gases. Avoid Short Circuits: Be careful with tools and connections to prevent sparks or short circuits. Tools and Equipment Needed Multimeter (for checking voltage and condition) Battery charger compatible with lead-acid batteries Battery terminal cleaner or wire brush Distilled water (if applicable, for batteries that can be serviced) Insulation tape Safety equipment (gloves, goggles) Steps to Repair and Charge Amaron Batteries 1. Inspect the Battery Check for physical damage, such as cracks or leaks. Inspect terminals for corrosion. Clean terminals with a wire brush if necessary. 2. Test the Battery Use a multimeter to check the voltage. A fully charged 12V battery should read around 12.6 to 12.8 volts. If the voltage is significantly lower (e.g., below 12 volts), the battery may need charging or could be damaged. 3. Charging the Battery Select the Right Charger: Use a smart charger or a lead-acid battery charger that matches the battery’s specifications. Connect the Charger: Connect the positive (+) terminal of the charger to the positive terminal of the battery. Connect the negative (-) terminal of the charger to the negative terminal of the battery. Set the Charger: Choose the appropriate charging mode (usually a slow charge is best for lead-acid batteries). Monitor Charging: Charging time will vary; typically, it can take several hours to overnight. Monitor the charging process. 4. Check Battery Condition After Charging Once fully charged, use the multimeter to measure the voltage again. Perform a load test (if available) to ensure the battery can hold a charge under load. 5. Repairing Cells (if applicable) For Serviceable Batteries: If the battery has removable caps: Check the electrolyte level; add distilled water if needed. Ensure the specific gravity of the electrolyte is within the acceptable range (use a hydrometer). Re-seal the Caps: Make sure all caps are securely in place after checking. 6. Final Inspection and Reinstallation Ensure all connections are clean and secure. Reinstall the battery in the vehicle, connecting the positive terminal first, followed by the negative terminal. Use insulation tape to secure any exposed connections. Additional Tips Avoid Overcharging: Overcharging can damage the battery and reduce its lifespan. Always use a charger with an automatic shut-off feature. Regular Maintenance: Periodically check battery health, clean terminals, and keep the battery charged to prolong its life. Replacement: If the battery fails to hold a charge after multiple attempts, consider replacing it. Conclusion Repairing and charging Amaron batteries can extend their life if done correctly. Always prioritize safety and follow proper procedures to ensure efficient operation. If you\\'re uncertain about any step, consult a professional or refer to the manufacturer\\'s guidelines.

The Amaron Flo series is known for its high-quality, maintenance-free batteries designed for a variety of applications, particularly in the automotive sector. Here’s an overview of the Amaron Flo batteries, their specifications, features, and applications: Key Features: Maintenance-Free: No need for regular maintenance or water refilling. Long Life: Engineered for durability and longevity. High Cranking Power: Designed to provide reliable starting power in various conditions. Vibration Resistant: Suitable for rugged environments and heavy usage. Specifications: Type: Lead-acid, maintenance-free. Voltage: Typically 12V. Technology: Enhanced flooded battery (EFB) technology, which improves cycling ability and overall performance. Common Models: Amaron Flo 12V 35Ah Dimensions: Approximately 230 mm (L) x 140 mm (W) x 175 mm (H) Weight: Around 10 kg Applications: Suitable for small cars and hatchbacks. Amaron Flo 12V 45Ah Dimensions: Approximately 230 mm (L) x 175 mm (W) x 190 mm (H) Weight: Around 12 kg Applications: Used in mid-sized cars and SUVs. Amaron Flo 12V 60Ah Dimensions: Approximately 260 mm (L) x 175 mm (W) x 190 mm (H) Weight: Around 15 kg Applications: Suitable for larger cars and vehicles with higher power demands. Amaron Flo 12V 70Ah Dimensions: Approximately 306 mm (L) x 175 mm (W) x 190 mm (H) Weight: Around 17 kg Applications: Designed for high-performance vehicles and larger SUVs. Amaron Flo 12V 100Ah Dimensions: Approximately 400 mm (L) x 175 mm (W) x 190 mm (H) Weight: Around 27 kg Applications: Used in commercial vehicles and high-demand applications. Applications: Automotive: Passenger cars, SUVs, and commercial vehicles. Heavy-Duty Vehicles: Trucks and buses that require reliable starting power. Two-Wheelers: Some models are suitable for motorcycles and scooters. Charging Recommendations: Charging Voltage: Typically between 14.4 to 15.0 volts, depending on the specific battery model. Charging Current: Should not exceed the recommended limits for optimal lifespan. Safety and Maintenance: Storage: Keep in a cool, dry place. Inspection: Regularly check for physical damage, corrosion, or leakage. Handling: Follow safety precautions during installation and use. For specific details about each model, including exact dimensions, weights, and other specifications, it’s advisable to refer to the official Amaron website or the product datasheets.

Exide offers a wide range of batteries across various categories, including automotive, industrial, and specialty batteries. Here’s a general overview of Exide batteries, their types, and key details: 1. Automotive Batteries Exide Xplore: Type: Lead-acid, maintenance-free. Applications: Standard vehicles, hatchbacks. Features: High cranking power, durable design. Exide Excell: Type: Lead-acid, conventional. Applications: Passenger vehicles and SUVs. Features: Good performance, reliable starting power. Exide Fusion: Type: Hybrid (Lead-acid and AGM). Applications: High-performance vehicles. Features: Enhanced durability, deep cycle capability. 2. Two-Wheeler Batteries Exide Moto: Type: Maintenance-free, lead-acid. Applications: Motorcycles and scooters. Features: Vibration-resistant, compact design. 3. Inverter and UPS Batteries Exide SMF (Sealed Maintenance Free): Types: 12V 7Ah, 12V 9Ah, 12V 18Ah, 12V 26Ah, 12V 42Ah, etc. Applications: UPS systems, home inverters, and backup power. Features: Maintenance-free, long service life, reliable performance. 4. Solar Batteries Exide Solar: Type: Lead-acid, deep cycle. Applications: Solar energy storage systems. Features: Designed for frequent deep discharges, long cycle life. 5. Industrial Batteries Exide Industrial: Types: VRLA, lead-acid, and more. Applications: Telecom, railways, and large-scale backup power. Features: High reliability, suitable for heavy-duty applications. 6. Specialty Batteries Exide UPS Batteries: Types: VRLA and lead-acid. Applications: Data centers, hospitals, and critical applications. Features: Fast recharge, high-performance reliability. General Specifications: Voltage Options: Commonly 12V for most applications. Capacity Range: From 7Ah to 200Ah or more, depending on the type. Charging Recommendations: Varies by battery type; generally, use smart chargers to avoid overcharging. Safety and Maintenance: Storage: Store in a cool, dry place. Inspection: Regularly check for physical damage or leakage. Handling: Follow safety precautions to avoid short-circuiting and handle carefully. For specific details regarding each model, including dimensions, weight, and exact specifications, it\\'s best to consult Exide’s official website or product datasheets.

Amaron Quanta batteries are known for their reliability and performance, particularly in applications like UPS systems, solar power setups, and backup power. Here’s an overview of the different types and details of Amaron Quanta batteries: Key Features: Sealed Maintenance Free (SMF): No need for water topping or maintenance. Long Service Life: Designed for extended use and durability. High Performance: Capable of handling high discharge rates. Deep Cycle Capability: Suitable for applications requiring frequent deep discharges. Types of Amaron Quanta Batteries: Amaron Quanta 12V 7Ah Dimensions: Approximately 151 x 65 x 94 mm Weight: About 2.5 kg Applications: UPS, alarm systems, portable electronics. Amaron Quanta 12V 9Ah Dimensions: Approximately 150 x 65 x 95 mm Weight: About 3.0 kg Applications: UPS, small power tools, and backup lighting. Amaron Quanta 12V 18Ah Dimensions: Approximately 181 x 77 x 167 mm Weight: Around 5.5 kg Applications: UPS, solar energy systems, and telecommunications. Amaron Quanta 12V 26Ah Dimensions: Approximately 166 x 175 x 125 mm Weight: About 7.0 kg Applications: Larger UPS systems, solar inverters, and backup power systems. Amaron Quanta 12V 42Ah Dimensions: Approximately 198 x 165 x 170 mm Weight: About 12.5 kg Applications: High-capacity UPS systems, solar power systems, and security systems. Amaron Quanta 12V 65Ah Dimensions: Approximately 350 x 167 x 175 mm Weight: Around 19.0 kg Applications: Heavy-duty UPS, large solar installations, and industrial applications. Charging Recommendations: Charging Voltage: Typically between 14.4 to 15.0 volts. Charging Current: Should not exceed specified rates (e.g., for a 7Ah battery, keep under 1.5A; for a 42Ah, under 6A). Storage and Maintenance: Store in a cool, dry place. Keep the battery fully charged if not in use for long periods. Regularly inspect for physical damage or signs of wear. Safety Precautions: Avoid short-circuiting terminals. Handle with care to prevent damage. Follow manufacturer guidelines for safe usage. For precise specifications and any additional models, it’s advisable to check the official Amaron website or product datasheets

The Exide 12V 42Ah SMF (Sealed Maintenance Free) battery is a versatile option, commonly used in applications like UPS systems, solar power setups, and backup power systems. Here are the detailed specifications and features: Specifications: Voltage: 12 Volts Capacity: 42 Ah (Ampere-hours) Type: Sealed Maintenance Free (SMF) Chemistry: Lead-acid (VRLA - Valve Regulated Lead Acid) Dimensions: Approximately 198 mm (L) x 165 mm (W) x 170 mm (H) (dimensions may vary slightly by model) Weight: Around 12.5 to 13.5 kg Features: Maintenance-Free: No need for electrolyte checks or water refills, reducing maintenance effort. Leak-Proof Design: Safe to use in various orientations without leakage risk. Long Service Life: Engineered for durability and reliability over extended periods. High Discharge Rate: Capable of delivering quick bursts of power for demanding applications. Applications: Uninterruptible Power Supplies (UPS) Solar power systems Emergency lighting Security and alarm systems Small electric vehicles and scooters Charging Recommendations: Charging Voltage: Typically between 14.4 to 15.0 volts. Charging Current: Should not exceed 4.2A for optimal battery health. Storage and Maintenance: Store in a cool, dry location. Ensure the battery is kept fully charged if not used for long periods. Regularly check for any physical damage or corrosion. Safety Precautions: Avoid short-circuiting the terminals. Handle the battery with care to prevent damage. Follow all manufacturer guidelines for safe operation and handling. Always refer to the specific product datasheet or manufacturer guidelines for the most accurate and tailored information regarding the particular model you are using.

The Exide 12V 26Ah SMF (Sealed Maintenance Free) battery is designed for reliable power in various applications, including UPS systems, solar power setups, and backup power solutions. Here are the key details: Specifications: Voltage: 12 Volts Capacity: 26 Ah (Ampere-hours) Type: Sealed Maintenance Free (SMF) Chemistry: Lead-acid (VRLA - Valve Regulated Lead Acid) Dimensions: Approximately 166 mm (L) x 175 mm (W) x 125 mm (H) (dimensions may vary slightly by model) Weight: Around 7.0 to 8.0 kg Features: Maintenance-Free: No need to add water or check electrolyte levels. Leak-Proof Design: Safe operation in various orientations without risk of leakage. Long Service Life: Built for durability and reliable performance. High Discharge Rate: Capable of delivering quick bursts of power for demanding applications. Applications: Uninterruptible Power Supplies (UPS) Solar energy systems Emergency lighting Security systems Small electric vehicles and mobility aids Charging Recommendations: Charging Voltage: Generally between 14.4 to 15.0 volts. Charging Current: Should not exceed 2.6A for optimal battery lifespan. Storage and Maintenance: Store in a cool, dry environment. Ensure the battery is fully charged if not in use for extended periods. Regularly inspect for any signs of damage or wear. Safety Precautions: Avoid short-circuiting the terminals. Handle carefully to prevent physical damage. Follow all manufacturer instructions for safe use. For the most accurate information, always refer to the specific product datasheet or manufacturer guidelines related to your model.