'additional safety'

The Amaron Pro 45Ah AAM-PR-0055B24LS is a car battery from the Amaron Pro series, designed for vehicles that require a high-performance, maintenance-free power source. Below are the key details about this battery: 1. Battery Type Type: Lead-acid, Maintenance-free Series: Amaron Pro Technology: AGM (Absorbent Glass Mat) or Conventional lead-acid depending on the specific model 2. Capacity and Specifications Ampere-Hours (Ah): 45Ah Cold Cranking Amps (CCA): Typically around 600 CCA (can vary depending on region or specific variant) Reserve Capacity (RC): ~85 minutes (again, this may vary slightly depending on regional specifications) Voltage: 12V Weight: Approx. 12-15 kg (depending on the construction, for a 45Ah battery) 3. Dimensions Length: 238 mm Width: 129 mm Height: 227 mm Terminal Configuration: B24LS (L indicates the positive terminal is on the left side when viewed from the front of the battery) 4. Application Designed for small to mid-sized vehicles, including sedans, hatchbacks, and compact SUVs. Suitable for standard gasoline-powered cars and may be used in diesel engines that require a 45Ah battery. It can also be used in some older vehicles or as a replacement for weaker or dead batteries. 5. Key Features Maintenance-Free: Sealed and spill-proof design with advanced lead-calcium technology. Long Life: Amaron Pro batteries are designed for long service life, offering higher durability and resistance to extreme weather conditions (high heat and cold). High Cranking Power: Provides excellent cold cranking amps (CCA), which ensures reliable starts in cold weather. Corrosion Resistance: Has improved resistance to corrosion, extending battery life and reducing the need for maintenance. Leak-Proof and Spill-Proof: The battery is fully sealed, which makes it maintenance-free and safer than traditional flooded batteries. 6. Warranty Amaron Pro batteries typically come with a 2-year free replacement warranty and an additional 18-month pro-rata warranty (varies by region). This warranty is subject to the terms and conditions of the manufacturer and distributor. 7. Advantages Strong Performance: High starting power, especially for vehicles with demanding electrical systems. Durability: Designed for hot climates and harsh conditions, suitable for both urban and rural driving conditions. Low Self-Discharge Rate: The battery retains charge for longer when the vehicle is not in use. 8. Pricing Prices can vary depending on location, but typically Amaron Pro batteries in the 45Ah range cost between ₹3, 500 - ₹5, 000 (Indian Rupees) or around $60-$100 in other markets. Always check with local dealers for specific pricing. 9. Compatibility This specific model (AAM-PR-0055B24LS) is typically designed to fit vehicles with a B24LS terminal configuration. It is important to verify that your vehicle is compatible with this size and terminal arrangement before purchasing. 10. Installation This battery comes pre-charged and does not require any initial maintenance before installation. However, it should be installed by a professional or an authorized dealer to avoid mishandling or improper connections. 11. Safety Considerations Proper Disposal: Batteries should be recycled responsibly once their life cycle ends, as they contain toxic chemicals like lead and sulfuric acid. Handling: Always wear gloves and safety goggles when handling batteries to avoid acid spills or contact with the terminals. Conclusion: The Amaron Pro 45Ah AAM-PR-0055B24LS is an excellent choice for those looking for a reliable, maintenance-free, and high-performing car battery. It is a popular option for vehicles that demand consistent starting power in varying conditions. As with all batteries, it is essential to ensure compatibility with your vehicle\'s specifications before purchasing.

The Amaron Quanta SMF Battery 12V 75Ah, also known as the 12AL075, is a sealed maintenance-free (SMF) valve-regulated lead-acid (VRLA) battery designed for high performance and reliability in various applications. Below are the detailed specifications and features of this battery: Product Overview Type: Lead Acid Battery Model: Amaron Quanta 12V/75Ah (12AL075) Voltage: 12 Volts Capacity: 75 Amp-hours (Ah) Weight: Approximately 23 kg Dimensions: Typically around 30.5 cm x 17.5 cm x 21.5 cm (exact dimensions may vary slightly by manufacturer) Key Features Sealed Maintenance-Free (SMF): Designed to be maintenance-free, eliminating the need for regular checks and maintenance. Valve-Regulated: The VRLA technology prevents spillage and allows for safe operation in various positions. Long Life: Engineered for durability and longevity, making it suitable for backup power applications. High Performance: Provides reliable power during outages, making it ideal for UPS systems and inverters. Quick Recharge: Capable of fast charging, reducing downtime. Low Self-Discharge Rate: Retains charge for longer periods when not in use. Compliance: Adheres to JIS8702C standards, ensuring exceptional quality and safety. Applications Uninterruptible Power Supply (UPS): Suitable for both home and commercial UPS systems. Inverters: Works well with various inverter systems for backup power. Data Centers: Ideal for critical applications requiring uninterrupted power. Telecommunication Systems: Used in telecom applications needing reliable power. Industrial Equipment: Supports various industrial applications needing stable power. Security Systems: Ideal for fire alarm systems and other security devices. Warranty & Support Warranty: Typically comes with a warranty period of 24 months. Customer Support: Available through authorized service centers and online platforms. Shipping & Delivery Shipping: Usually calculated at checkout; check with the vendor for shipping options. Delivery Time: Generally within 3-10 working days, depending on location. Same Day Delivery: Available in select areas. Additional Information The Amaron Quanta 12V 75Ah battery is known for its reliability and efficiency, making it a preferred choice for consumers looking for a robust power backup solution. It is designed to withstand harsh conditions and provide consistent performance over its lifespan.

Vertiv Liebert PSA - 1000VA Mini Tower UPS PSA1000MT3-230U Specifications and Details The Vertiv Liebert PSA PSA1000MT3-230U is a line-interactive uninterruptible power supply (UPS) designed to provide reliable power protection for small office computers and electronic equipment. Below are the detailed specifications and features of this UPS model. Key Specifications Model: Vertiv Liebert PSA PSA1000MT3-230U Capacity: VA: 1000 VA Watts: 600 Watts Form Factor: Mini Tower Phase: Single Phase (1:1) Battery Type: Lead Acid Run Time: Typical: 5 minutes (varies with load) Warranty: 2 years Physical Dimensions Height: 234 mm Width: 147 mm Depth: 360 mm Weight: 9.5 kg Features User -Friendly LED Display: Provides easy operation and monitoring of UPS status. Socket Configuration: Multiple battery-backed and surge-protected sockets to accommodate different types of loads. Includes a mix of battery-backed and surge-only sockets. USB Communication: Comes with USB communications/shutdown software and cable for plug-and-play use. User -Replaceable Batteries: Designed for easy battery replacement to maximize the initial investment. Data Line Protection: Protects data lines to ensure the safety of connected devices. Environmental Compliance: Fully RoHS compliant, ensuring it meets environmental standards. Additional Information Input Voltage: Typically operates at 230 VAC. Output Waveform: Simulated sine wave. Runtime Performance: Provides 5 or more minutes of battery backup depending on the load level. Conclusion The Vertiv Liebert PSA PSA1000MT3-230U is an efficient and cost-effective solution for power protection in small office environments. Its combination of features, including user-friendly interfaces, multiple socket options, and easy maintenance, makes it a reliable choice for safeguarding electronic equipment against power interruptions.

The Vertiv 30 kVA ITA2 UPS is designed for critical power applications, providing reliable protection and power management for data centers, telecommunications, and industrial environments. Here are the key details: Specifications Power Rating: 30 kVA Input Voltage: Typically supports 380/400/415V three-phase configurations. Output Voltage: 380/400/415V three-phase. Frequency: 50/60 Hz, auto-sensing. Key Features Double Conversion Technology: Ensures clean, stable output power by converting incoming AC to DC and then back to AC. High Efficiency: Offers high efficiency ratings, often exceeding 95% in normal operation mode, reducing energy costs. Scalability: Modular design allows for parallel operation with additional units for increased capacity and redundancy. Batteries: Typically uses valve-regulated lead-acid (VRLA) batteries, designed for long life and maintenance-free operation. Smart Battery Management: Extends battery life through intelligent charging and monitoring. User-Friendly Interface: LCD display for easy monitoring of UPS status, alarms, and operational data. Physical Characteristics Dimensions: Varies by model; generally around 600 mm x 800 mm x 2000 mm (length x width x height). Weight: Approximately 400-500 kg (exact weight depends on specific configuration). Cooling: Air-cooled, requiring sufficient ventilation space around the unit. Safety Features Overload Protection: Safeguards against overload conditions. Short Circuit Protection: Automatically disconnects in case of short circuit occurrences. Thermal Protection: Built-in temperature sensors to prevent overheating. Applications Data Centers: Protects critical IT equipment from power disturbances. Telecommunications: Ensures reliable power supply for telecom networks. Industrial: Supports machinery and systems requiring consistent power. Maintenance and Support Service Options: Vertiv offers various service agreements for maintenance and support. Remote Monitoring: Many models come with options for remote management and monitoring. Conclusion The Vertiv 30 kVA ITA2 UPS is engineered to provide robust power protection for a range of critical applications, combining high efficiency with user-friendly management features. For specific configurations, pricing, and installation details, it is advisable to consult with Vertiv or an authorized distributor.

The Amaron 12V 200Ah SMF (Sealed Maintenance Free) battery is designed for various applications, including industrial use, telecommunications, and backup power systems. Here are the key details: Specifications Voltage: 12V Capacity: 200Ah Type: Sealed Maintenance Free (SMF) Lead-Acid Battery Technology: Advanced Lead-Calcium technology, ensuring better performance and longer life. Key Features Maintenance-Free: No need for regular topping up of electrolyte, reducing maintenance efforts. High Durability: Designed to withstand extreme conditions, ensuring reliable performance. Vibration Resistant: Built to endure vibrations, making it suitable for use in vehicles and industrial settings. Long Shelf Life: Offers extended shelf life due to low self-discharge rates. Deep Discharge Capability: Suitable for applications requiring deep cycling. Applications Telecommunications: Power backup for telecom networks and equipment. UPS Systems: Used in uninterruptible power supply systems for critical applications. Solar Energy Systems: Can be utilized in renewable energy setups for storage. Industrial Use: Suitable for powering machinery and equipment. Physical Characteristics Dimensions: Approx. 510 mm x 220 mm x 220 mm (length x width x height) (specific dimensions may vary). Weight: Around 60 kg (may vary by manufacturer). Terminal Type: Typically, lead or brass terminals for secure connections. Safety Features Valve-Regulated: Prevents leakage and spillage, enhancing safety during operation. Overload Protection: Designed to handle overcharging and discharging conditions safely. Warranty Amaron batteries often come with a warranty period ranging from 18 months to 2 years, depending on the specific model and application. Maintenance Tips While SMF batteries require minimal maintenance, it’s essential to keep the terminals clean and ensure proper ventilation during operation. Conclusion The Amaron 12V 200Ah SMF battery is a reliable and efficient power solution for a variety of applications, combining high performance with low maintenance needs. For specific pricing, availability, and additional information, it’s recommended to consult authorized dealers or the official Amaron website.

Repairing and charging Amaron batteries (or any lead-acid battery) requires caution and adherence to safety procedures. Here’s a comprehensive guide on how to repair and charge Amaron batteries: Safety Precautions Personal Protective Equipment (PPE): Always wear safety goggles and gloves. Ventilation: Work in a well-ventilated area to avoid inhaling harmful gases. Avoid Short Circuits: Be careful with tools and connections to prevent sparks or short circuits. Tools and Equipment Needed Multimeter (for checking voltage and condition) Battery charger compatible with lead-acid batteries Battery terminal cleaner or wire brush Distilled water (if applicable, for batteries that can be serviced) Insulation tape Safety equipment (gloves, goggles) Steps to Repair and Charge Amaron Batteries 1. Inspect the Battery Check for physical damage, such as cracks or leaks. Inspect terminals for corrosion. Clean terminals with a wire brush if necessary. 2. Test the Battery Use a multimeter to check the voltage. A fully charged 12V battery should read around 12.6 to 12.8 volts. If the voltage is significantly lower (e.g., below 12 volts), the battery may need charging or could be damaged. 3. Charging the Battery Select the Right Charger: Use a smart charger or a lead-acid battery charger that matches the battery’s specifications. Connect the Charger: Connect the positive (+) terminal of the charger to the positive terminal of the battery. Connect the negative (-) terminal of the charger to the negative terminal of the battery. Set the Charger: Choose the appropriate charging mode (usually a slow charge is best for lead-acid batteries). Monitor Charging: Charging time will vary; typically, it can take several hours to overnight. Monitor the charging process. 4. Check Battery Condition After Charging Once fully charged, use the multimeter to measure the voltage again. Perform a load test (if available) to ensure the battery can hold a charge under load. 5. Repairing Cells (if applicable) For Serviceable Batteries: If the battery has removable caps: Check the electrolyte level; add distilled water if needed. Ensure the specific gravity of the electrolyte is within the acceptable range (use a hydrometer). Re-seal the Caps: Make sure all caps are securely in place after checking. 6. Final Inspection and Reinstallation Ensure all connections are clean and secure. Reinstall the battery in the vehicle, connecting the positive terminal first, followed by the negative terminal. Use insulation tape to secure any exposed connections. Additional Tips Avoid Overcharging: Overcharging can damage the battery and reduce its lifespan. Always use a charger with an automatic shut-off feature. Regular Maintenance: Periodically check battery health, clean terminals, and keep the battery charged to prolong its life. Replacement: If the battery fails to hold a charge after multiple attempts, consider replacing it. Conclusion Repairing and charging Amaron batteries can extend their life if done correctly. Always prioritize safety and follow proper procedures to ensure efficient operation. If you're uncertain about any step, consult a professional or refer to the manufacturer's guidelines.

Amaron Quanta batteries are known for their reliability and performance, particularly in applications like UPS systems, solar power setups, and backup power. Here’s an overview of the different types and details of Amaron Quanta batteries: Key Features: Sealed Maintenance Free (SMF): No need for water topping or maintenance. Long Service Life: Designed for extended use and durability. High Performance: Capable of handling high discharge rates. Deep Cycle Capability: Suitable for applications requiring frequent deep discharges. Types of Amaron Quanta Batteries: Amaron Quanta 12V 7Ah Dimensions: Approximately 151 x 65 x 94 mm Weight: About 2.5 kg Applications: UPS, alarm systems, portable electronics. Amaron Quanta 12V 9Ah Dimensions: Approximately 150 x 65 x 95 mm Weight: About 3.0 kg Applications: UPS, small power tools, and backup lighting. Amaron Quanta 12V 18Ah Dimensions: Approximately 181 x 77 x 167 mm Weight: Around 5.5 kg Applications: UPS, solar energy systems, and telecommunications. Amaron Quanta 12V 26Ah Dimensions: Approximately 166 x 175 x 125 mm Weight: About 7.0 kg Applications: Larger UPS systems, solar inverters, and backup power systems. Amaron Quanta 12V 42Ah Dimensions: Approximately 198 x 165 x 170 mm Weight: About 12.5 kg Applications: High-capacity UPS systems, solar power systems, and security systems. Amaron Quanta 12V 65Ah Dimensions: Approximately 350 x 167 x 175 mm Weight: Around 19.0 kg Applications: Heavy-duty UPS, large solar installations, and industrial applications. Charging Recommendations: Charging Voltage: Typically between 14.4 to 15.0 volts. Charging Current: Should not exceed specified rates (e.g., for a 7Ah battery, keep under 1.5A; for a 42Ah, under 6A). Storage and Maintenance: Store in a cool, dry place. Keep the battery fully charged if not in use for long periods. Regularly inspect for physical damage or signs of wear. Safety Precautions: Avoid short-circuiting terminals. Handle with care to prevent damage. Follow manufacturer guidelines for safe usage. For precise specifications and any additional models, it’s advisable to check the official Amaron website or product datasheets

The Vertiv 10kVA UPS is a true online double-conversion UPS designed to provide high-quality power protection for critical applications. Here are its key specifications and features: Specifications: Power Rating: 10kVA / 8kW Input Voltage: 230V AC Output Voltage: 230V AC Input Frequency: 50/60 Hz Output Frequency: 50/60 Hz Efficiency: Up to 94% (depending on load) Battery Type: Valve-Regulated Lead-Acid (VRLA) Battery Capacity: Typically provides backup for 10-15 minutes at full load (depending on battery configuration) Dimensions: Varies by model, typically around 700 x 500 x 1000 mm Weight: Approximately 80-100 kg (depending on configuration) Features: True Online Operation: Provides continuous power supply without any transfer time, ensuring zero downtime. Double-Conversion Technology: Ensures high-quality power output, independent of input voltage and frequency. High Efficiency: Reduces energy costs and heat generation, contributing to a more sustainable operation. Advanced Battery Management: Prolongs battery life and ensures optimal performance through intelligent charging and discharging. LCD Display: Provides real-time monitoring of UPS status, including input/output voltage, load percentage, and battery status. Modular Design: Allows for easy maintenance and upgrades. Multiple Communication Ports: Includes RS-232, USB, and optional SNMP for remote monitoring and management. Hot-Swappable Batteries: Enables battery replacement without interrupting power to the load. Parallel Capability: Allows for scalability and redundancy in high-availability applications. Applications: Data Centers: Ensures reliable power for critical IT infrastructure. Telecommunications: Protects sensitive telecom equipment from power disturbances. Medical Facilities: Supports essential medical equipment requiring uninterrupted power. Industrial Applications: Suitable for manufacturing and process control systems. Financial Institutions: Provides reliable power for critical financial systems. Services: Engineering: Customized solutions for specific power requirements. Installation: Professional installation services to ensure proper setup. Preventive Maintenance: Regular maintenance to ensure optimal performance and reliability. Monitoring: Remote monitoring services to track UPS performance and health. Recycling: Environmentally responsible disposal of old batteries and equipment. Certifications: ISO 9001: Quality management system certification. ISO 14001: Environmental management system certification. ISO 45001: Occupational health and safety management system certification. CE: Conforms to European Union safety and environmental standards. UL: Conforms to Underwriters Laboratories safety standards. Warranty: Standard Warranty: Typically offers a 2-year warranty on the UPS system and batteries. Extended Warranty: Options for additional warranty coverage may be available. Additional Information: The Vertiv 10kVA UPS is designed to provide high-quality power protection for critical applications, ensuring maximum uptime and reliability. Its true online double-conversion technology and advanced battery management features make it an ideal choice for data centers, telecommunications, medical facilities, and other industries requiring high-availability power systems. If you need more specific details or have further questions, feel free to ask!

The Emerson Vertiv 6KVA 1:1 Phase Online UPS with an inbuilt isolation transformer is designed to provide reliable power protection for critical applications, particularly in environments requiring high levels of power quality and isolation. Here are the key specifications and features: Specifications: Power Rating: 6kVA / 4.8kW Input Voltage: 230V AC Output Voltage: 230V AC Input Frequency: 50/60 Hz Output Frequency: 50/60 Hz Efficiency: Up to 92% (depending on load) Battery Type: Valve-Regulated Lead-Acid (VRLA) Battery Capacity: Typically provides backup for 10-15 minutes at full load (depending on battery configuration) Dimensions: Varies by model, typically around 600 x 400 x 800 mm Weight: Approximately 50-70 kg (depending on configuration) Features: True Online Operation: Provides continuous power supply without any transfer time, ensuring zero downtime. Inbuilt Isolation Transformer: Enhances power quality by isolating the load from input disturbances and providing additional safety. High Efficiency: Reduces energy costs and heat generation, contributing to a more sustainable operation. Advanced Battery Management: Prolongs battery life and ensures optimal performance through intelligent charging and discharging. LCD Display: Provides real-time monitoring of UPS status, including input/output voltage, load percentage, and battery status. Modular Design: Allows for easy maintenance and upgrades. Multiple Communication Ports: Includes RS-232, USB, and optional SNMP for remote monitoring and management. Applications: Data Centers: Ensures reliable power for critical IT infrastructure. Telecommunications: Protects sensitive telecom equipment from power disturbances. Medical Facilities: Supports essential medical equipment requiring uninterrupted power. Industrial Applications: Suitable for manufacturing and process control systems. Services: Engineering: Customized solutions for specific power requirements. Installation: Professional installation services to ensure proper setup. Preventive Maintenance: Regular maintenance to ensure optimal performance and reliability. Monitoring: Remote monitoring services to track UPS performance and health. Recycling: Environmentally responsible disposal of old batteries and equipment. Certifications: ISO 9001: Quality management system certification. ISO 14001: Environmental management system certification. ISO 45001: Occupational health and safety management system certification. CE: Conforms to European Union safety and environmental standards. UL: Conforms to Underwriters Laboratories safety standards. Warranty: Standard Warranty: Typically offers a 2-year warranty on the UPS system and batteries. Extended Warranty: Options for additional warranty coverage may be available. Additional Information: The Emerson Vertiv 6KVA Online UPS with an inbuilt isolation transformer is designed to meet the demanding power quality requirements of various industries. Its features ensure that critical systems remain operational even during power interruptions, making it a reliable choice for businesses that cannot afford downtime.